Vortex Viper / Venom Red Dot Sight Mount for HK VP9 OR

Description: Vortex Viper / Venom Red Dot Sight Mount for HK VP9 OR | VP9L Optics Ready (fits Burris FastFire, Docter, Viridian RFX25)The EGW red dot sight mount adapter plates for the HK VP9 Optics Ready Models are meant to be installed in the factory slide cut. Simply remove the plate cover and replace it with our mount in order to mount your Vortex Viper, Vortex Venom, Burris FastFire, or Docter red dot sight to your HK VP9 Optics Ready, HK VP9L Optics Ready, HK VP9 Tactical Optics Ready or any other HK VP9 Optics Ready Models. You can take our mount off and replace your rear sight at any time. Mounting hardware included.This mount fits:HK VP9 Optics Ready Models - HK VP9 Optic Plate #5(This mount is comparable to the HK VP9 Optics Ready #5 Plate)The screws that come with your slide to mount the plate to the slide may be reused. They are also available for purchase from the drop down above. HK recommends replacing the plate mounting screws after 2,000 rounds. HK recommends torquing the screws for the plate to 2Nm or 17.7 in/lbs.The screws to mount the red dot to the plate are provided at no extra cost. We recommend using 15 in/lbs.Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Torque Specs: 15 in/lbsMounting Hardware:(2) 6-32 Button Head Screws(2) 6-32 Flat Head ScrewsRed Dot Fitment: Viridian RFX25Vortex ViperVortex VenomBurris FastFireBurris FastFire 2Burris FastFire 3Burris FastFire 4DocterADE RD3-001ADE RD3-002ADE RD3-009UTG Reflex Micro DotCrimson Trace CTS-1200Crimson Trace CTS-1300Sightmark Mini ShotInstallation Instructions- Remove the rear cover plate- Install the EGW sight mount and torque the mounting plate screws- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque red dot mounting screws to 15in/lbs2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation.

Price: 44.99 USD

Location: Beverly Hills, California

End Time: 2024-11-25T18:38:54.000Z

Shipping Cost: N/A USD