VMAX V10-63F1 10ah 12V AGM battery upgrade for DTS 12V 6.5AH SLA

Description: VMAX V10-63F1 HI PERFORMANCE/DEEP CYCLE 12-Volt 10Ah AGM Deep Cycle SLA Battery(CHECK IF YOUR EQUIPMENT REQUIRES MORE THAN 1 BATTERY) Voltage: 12 VoltCapacity(Amp Hours, @20-Hr Rate): 10Ah RC (min): 20 Terminals: F2/F1 Terminals (ADAPTER INCLUDED) Dimensions (inches): 5.94"x2.6"x3.74" Weight: 6.2lb Charging Current: 1.5A-5A (a smart charger is recommended) Charging Voltage: 14.4V-14.9V Float Voltage: 13.5V-13.8V Features:AGM Electrolyte Suspension SystemMaintenance free OperationNo Dangerous Fumes or Gases Fast Charge Delivery CapabilitiesCustom Built Military Grade AlloysExtremely Low Self Discharge RateApproved for Mobile, Maritime and Air TravelExtreme Vibrations, Heat and Weather resistantSealed, Non-Spillable, Non Hazardous ConstructionMaximum Power Density and Deep Cycle Capabilities Charging Options: Smart / Microprocessor controlled charger: Alternator: 14V-15V.Solar Panel: 15W-50W.Charge Controller: 2A-15A Operating Temperature Range: Discharge: -4~140FCharge: 14~140FStorage: -4~140F Temperature Compensation: Cycle use: -30mV/C per CellStandby use: -20mV/C per Cell UPC: 760921777916 EXCELLENT UPGRADE FOR ANY 7.2, 7.5, 6, or 9 AH BATTERY WITH "F1" OR "F2" TERMINALS All VMAXTANKS AGM batteries feature: Sealed Construction The unique construction and sealing techniques of VMAX tanks guarantee leak proof operation in any position with no adverse effect to capacity or service life. VMAX tanks are classified as non-spill able, non-hazardous, dry batteries making them NOT restricted for Surface, Maritime and Air Transport.Electrolyte Suspension system VMAX tanks utilize an electrolyte suspension system consisting AGM (Absorbed Glass Matt) of a high porosity that totally absorb and contain the electrolyte. No silica gels or any other contaminants are used.Maintenance Free Operation There is no need to check specific gravity of the electrolyte or add water to VMAXTANKS™ during float service life.Reliable, Rugged Construction The extra strong ABS container reduces case bulging and plate warping, ensuring long life and high performance.Low Pressure Valve Regulated System All VMAXTANKS™ are equipped with safety release valves, designed to operate between 0.98-196.1kpa and automatically reseal. Hence, there is never an excessive accumulation of gas within the battery.Heavy Duty Military Grade Grids Heavy duty lead tin alloy grids provide an extra margin of performance and service life in either float or cyclic applications, even after repeated over discharges. Cyclic Service Life VMAX is known to deliver one of the highest numbers of discharge / recharge cycles. Depending on the use and average depth of discharge it can offer an average of: Number Of Cycles Depth of Discharge 300 100% 600 75% 900 50% 1500 25% 3500+ 10% Float Service Life VMAXTANKS™ have an expected life span of 6 to 10 years in float service applications. Low Self Discharge The self discharge rate of the new VMAX tanks at room temperature is approximately 1-2% of rated capacity per month (compared to 2-3% for most other AGM batteries and 15-20% for Lead Acid batteries). Operating Temperature VMAXTANKS™ may be operated over a broad range of ambient temperatures.Ultra Low Resistance VMAXTANKS™ Ultra Low Resistance make it up to 99% efficient (compared to 85-95% as in Lead Acid Batteries and 97% in most other GEL and AGM batteries).Higher Power Density A special assembly technology is used to enhance power density to a considerable level. Don’t settle for an average Lead Acid Battery, upgrade to a VMAX CHARGE TANK premium AGM deep cycle battery. SHIPPING COST TO CANADA INCLUDES: SHIPPING, DUTY, CUSTOMS, TAXES, AND BROKERAGE FEES. NO ADDITIONAL CHARGES UPON DELIVERY.

Price: 34.93 USD

Location: Southfield, Michigan

End Time: 2024-09-09T19:58:23.000Z

Shipping Cost: 0 USD