Description: Using MX-S1 sdr switch, you can integrate your transceiver and SDR with similar or better reception performance than advanced transceivers. The SDR frequencies and modes are synchronized with your transceiver (using any popular SDR software), and with a single mouse click you can quickly go to any frequency on the band. When listening with the transceiver, the transmit antenna is not disconnected from the SDR and the spectrum display on the PC is active. SDR audio is muted during transmission and sidetone comes from the transceiver. A smooth and adjusted delay that switches back to SDR audio at the right time avoids interference from delayed signals from SDR. A high power input RF limiter for high currents keeps your SDR safe. There is no limit to the power output - the MX-S1 sits between the transceiver and the power amplifier. Multi-level foolproof protection of SDR inputs. PTT is used as a control signal for TX/RX switching. High-quality connectors - A particularly reliable 3.5mm telephone plug is suitable for all audio connections. A 12 V transceiver supply can be used to power the device. Main features: Allows the SDR and the TRX to use simultaneously the same antenna. In receive mode the SDR is connected to the antenna, whereas during transmission it is disconnected and grounded. The TRX is permanently connected to the antenna. In case a separate receive antenna is used, the SDR is fully protected during transmission. The MX-S1 consists of two separate boards:Audio Switch – does audio path switching and also responsible for controlling the ANT Switch.ANT Switch – It is RF shielded and contains the antenna relay and receive input limiter. High quality connectors are used.PTT from the TRX is used as a control signal.During transmission, the audio signal from the SDR is muted and the audio from the TRX is selected. Double fault SDR input protection in case of antenna relay dysfunction. There is a high power input RF limiter for high currents keeping the input voltage of the SDR at safe levels. This protection can withstand full TRX power. Protection against disconnected TRX PTT cable,Protection from missing power supply,Over current protection with resettable fuse.Recommended to be powered from the 12 V power source used by the transceiver (requires common ground). Can control additional external relays (up to 200 mA current) synchronized by the TRX PTT signal – e.g. for PA control, TX antenna detuning, receive antenna switching, station automation etc. This approach avoids RF ground loops when multiple devices are used. - Frequency : DC-60Mhz - Maximum power: 100W - Insertion loss: 0.3DB - Working voltage: 12V (10V-15V) - Working current: < 100MA - SWR: ≤ 1.5 - Interface: SL16 - Weight: 700G/1.5LB - Dimensions: 15 x 13 x 5cm Package Included: - 1 x MX-S1 SDR Switch - 1 x Radio cable M connector - 1 x SDR cable SMA connector - 1SET Radio PTT signal interface kit( including 3.5 modified cables, 1PC RCA plug, 1PC FT-818 plug, 1PC ICOM plug)
Price: 151.05 USD
Location: Guangdong
End Time: 2024-09-06T02:16:05.000Z
Shipping Cost: 14.99 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Return policy details:
Features: Auto-Scan
Compatible Model: for elecraft k3, for ft-818, for ic-7300, for ic-71000
Band: AM, AM/FM, VHF
Unit Type: ft
Number of Channels: 2
Model: MX-S1
Brand: PUEKEO
Band Type: Dual Band
Color: Black
Type: SDR Switch
