Stone Master Molds Stone Veneer Rubber Mold for Concrete, Fieldstone Corner Mold

Description: Produce your own custom Fieldstone Corners for indoor/outdoor walls, raised bed gardens, columns, etc. Professional grade rubber masonry mold will last for hundreds of pours, created from natural stone to reproduce the natural stone's finest detailsEach of 3 mold versions you purchase has one-of-a-kind stones with no repeatsNo release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds, urethane molds, and silicone moldsMade in the USA Stone Master Molds Fieldstone corner molds are designed to compliment the matching Fieldstone flat stone molds. A corner plug (sold separately) is required for one step corners. These professional quality concrete masonry forms will create irregularly shaped fieldstone corners, also known as flagstones. The finished product/stone is approximately 1-1.75" thick. Each mold makes approximately 1.5 linear feet if drystacked and 1.75 linear feet with a grout joint. Stone Master's rubber molds are made from plastisol, which requires no release agent and will last for hundreds of pours. Made in the USA, both materials and labor. Available in 3 unique version, with no stone repeats. Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix: This is one suggestion for mixing the concrete for manufactured stone. There are many other instructions available online, including videos. BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing. If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc. A plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble. Cure in the molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.

Price: 132.95 USD

Location: Kansas, Oklahoma

End Time: 2024-03-02T20:01:09.000Z

Shipping Cost: N/A USD