Star Wars Master Replicas Anakin Skywalker AOTC Force FX Lightsaber SW-201 2002

Description: Here is a 2002 Star Wars Master Replicas Anakin Skywalker Force FX Lightsaber SW-201 from Episode II: Attack of the Clones. This collectible item features a light blue blade, action sounds of humming, swinging, and clashing that is fully tested and everything completely working. The blade does not have scrolling up and down LED lights inside, it turns on and off the light as a whole. The lightsaber has been on display most of the time. The lightsaber itself is in great condition; no scratches, dings, or anything missing. There are a few tiny ripples scattered around the mid and lower section of the hilt within the chrome metal area in mint condition, it is hardly seen which is camouflaged when especially looking from half to full arm length distance. Despite of this it is not that bad, the hilt still feels comfortable and smooth to hold. The black area from the hilt's middle section and the grips is where held mostly. The blade tip somehow by surprise came loose while testing the clashing feature, it was put back in on top and reinforce with a small piece of Scotch packaging tape as seen in the 18th photo. So far after a while then tested again with swinging, the blade tip is still holding securely. There is no original box and no original display stand that comes with this lightsaber. This takes 6 AA batteries to power up the lightsaber. This lightsaber when accessing the batteries does not open directly from the very bottom. When accessing the batteries (this process is shown briefly by the 14th to 16th photo): Lift and rotate the top layer spring loaded black rectangle piece where the bubble strips on top are from the hilt's middle section 70 degrees to the left or right. Use a Phillips head screwdriver to unscrew the bottom screw almost out. The reason is if you unscrew all the way then the screw will come out. Rotate the bottom half layer counterclockwise of the hilt by the grips out. When putting everything together after accessing the batteries (shown going from 16th to 14th photo): Rotate the hilt's bottom half layer clockwise almost all the way lining up the grooves with the red and green piece seen from the 17th photo of my finger pointing at it, don't tight all the way because there is a hole where the bottom screw goes through to connect the hilt completely. Use the Phillips head screwdriver to screw the bottom screw in. Rotate the top layer spring loaded black rectangle piece 70 degrees back. If rotated to the left then rotate back right, if rotated to the right then rotate back left. To turn on or off the lightsaber, you slide the black switch that is at the top backside section of the hilt up or down. The 12th photo where my finger is on will also show you. Please use the photos to see the item's condition visually. I will also take best offer as another option for the purchase.

Price: 200 USD

Location: Lynnwood, Washington

End Time: 2024-09-30T05:41:48.000Z

Shipping Cost: N/A USD