Speedway Universal Hotrod Electric Power Window Conversion Installation Kit

Description: Versatility and Compatibility: This Universal Aftermarket 2-Door Power Window Conversion Kit allows you to transform manual crank-up windows into modern power electric windows. Suitable for flat glass applications with glass heights from 6" to 24" and 16" of straight up and down travel. Ideal for classic cars and custom street rod applications., Dimensions and Fit: The kit has an overall depth of 2-3/8". Motors measure 5" wide x 6-1/4" long, while the tracks are 1-3/8" wide x 20" long. The kit will fit doors with a minimum of 1” clearance between glass and door to mount regulator, and glass must extend down into the door by at least 1-1/2” for attachment to the regulator., Comprehensive Kit: The kit includes everything you need for an upgrade: DPDT switches, switch bezels, wiring, crossove Universal Aftermarket 2-Door Power Window Conversion Kit Sku # 91123332 Mfr. Part # 91123332 Condition New Brand Speedway Motors Sold Each Details Info Convert manual crank-up windows to modern power electric windows Works for flat glass windows only Kit for 2 doors Fits many classic car and custom street rod applications Includes modern OEM style DPDT switches and bezels, wiring, regulator, and crossover kit 12V operation only Instructions included Pre-wired pigtails and wiring harnesses Power Windows for your Classic Ride Stop being cranky! Update your old manual windows to modern power electric windows to our Universal 2-Door Electric Power Window Aftermarket Conversion kit. Fits all flat glass windows, and includes switches, switch bezels, wiring, regulator, crossover kit and detailed assembly instructions. For Nearly All Flat Glass Applications Our universal power window conversion kit will work for many classic cars and many custom applications that use flat glass windows, but to make sure our kit will fit your vehicle, here are the important dimensions: Glass must extend down into the door a minimum of 1-1/2” for attachment to the regulator. If current glass is too short, new glass will need to be sourced at a local shop. Tempered glass is highly recommended as it’s both safer and stronger than normal glass 16” straight up and down travel Must have a minimum of 1” clearance between glass and door to mount regulator Tracks measure 20” long x 1-3/8” wide Motor measures 5” wide x 6-1/4” long Kit has an overall depth of 2-3/8” Recommended available depth in door cavity of 2-1/2” Must have a minimum of 7” below the glass when the window is at its lowest position Easy Installation A flexible actuator makes this power window kit ideal for an upgrade to a classic car or a custom street rod build. Pre-wired pigtails and wiring harness plug directly into switches and motors for easy, trouble-free installation. OEM style DPDT rocker switches with texturing on the down window side, make operation by touch simple and keep your eyes on the road. Switch bezels are included for a clean installation. This kit is for 12-volt applications only. ator cable to better fit your custom street rod or muscle car. Includes: Switches, Switch bezels, wiring and crossover kit. Use of is suggested. Charts (PDF) Installation Tips Flat glass applications only. If windows have any curvature, we recommend using OEM replacement parts instead. 12-volt applications only. To protect your vehicles electric system, we recommend relay 91064004. Due to the universal fitment, some minor modification to your bracket may be required. We recommend checking your glass run channels and lower rubber window stop. Install a lower rubber window stop if one isn’t present, or replace if deteriorated. If custom glass is used, we highly recommend the use of safer, tempered glass. Specs Sold in Quantity Kit MFG. Part # 91123332 Notes 12-volt applications only Reviews Works Rated by Tim on October 04, 2021 Summary: Universal so knew needed modifications. Put in 1937 ford pickup. Have to cut mounting tabs flush and weld. First side took hours but once measurements were finalized 2nd side was 15min. Yes, I recommend this product. WIll be neet in my 68 Mustang. Rated by Underdog on May 25, 2021 Summary: Up and down. Yes, I recommend this product. I would for a different vehicle Rated by Sloan on November 08, 2020 Summary: The parts look like good quality, unfortunately my doors and to thin to fit... I am still keeping them to use on another project I would buy this product again. Rated by JP31 on July 12, 2020 Summary: price was great and I Weill replace the switches with ones off a corvette. Yes, I recommend this product. I will buy this product again. Rated by Gorilla on May 26, 2020 Summary: I have used this product in other vehicles that I have built and will use it in any more that I will build. Pros: Easy To Install Yes, I recommend this product. Related Items / Suggested Parts Speedway Budget 40-Amp Electric Relay Kit Speedway Double Throw Toggle Switch Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 71 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 177.99 USD

Location: Lincoln, Nebraska

End Time: 2023-09-29T23:52:15.000Z

Shipping Cost: 0 USD