Description: Saillong Vent Blower Accessory Kit, Practical Part for Heaters with Mr. Heater, Dyna Glo Heater, Comfort Glow Vent Heater, Dyna Glo, Dyna Glo 30, 000 BTU heater. Specification: Size: 6.1 x 5.1 x 5.3 inch (length x width x height) Color: black Spacing between screws: 5.4 inch Completely assembled, no need to assemble by your own. Easy Installation: first remove fan knock out panel by using a screw driver, then, with the rocker switch positioned in the top right corner, attach fan to rear panel of the heater using the 4 screws provided, finally plug power cord into a properly grounded 3 prong receptacle. Package includes: 1 x Vent blower fan accessory with power cord 4 x Screws 1 x Manual instruction Warm tip: Please read this instruction manual carefully and completely before trying to assemble, operate, or service this heater. Please do not use in wet place, such as bathrooms, laundry rooms. Please do not operate the heater with a broken power cord or plug since it will be broken due to the improper usage. The brands related above are only for purposes of demonstrating compatibility, not use as trademarks, our trademark is Saillong. Vent Blower Accessory Kit: completely assembled including power cord, mounting screw; Suitable for heater without exhaust hole, with Mr. Heater, Comfort Glow, Dyna Glo, Dyna Glo 30, 000 BTU heater 2 In 1 Manual and Auto Mode: this fan is equipped with manual 'MAN' and automatic 'AUTO' modes; Set the switch to 'MAN' for manual mode, allowing the fan to continuously run until the switch is returned to the OFF 'O' position'; Set the switch to 'AUTO' for the automatic mode, which will turn the fan on and off based on ambient room temperature; It may take 5 to 10 minutes for the fan to come on when the heater is cold Easy Installation: the whole parts of the fan have been well assembled, you only need to use the screws attached to install it on the back of the heater, can be applied for wall mounted or floor plate heater Specification: the dimension of the blower fan is 6.1 x 5.1 x 5.3 inch (length x width x height), the spacing between the screw holes is 5.4 inch Package Content: 1 x vent blower fan accessory with power cord, 4 x screws, 1 x manual instruction
Price: 29.08 USD
Location: Phoenix, Arizona
End Time: 2024-08-30T08:59:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Color: black
Size: 6.1 x 5.1 x 5.3 inch (length x width x height)
Package Dimensions LxWxH: 6.38x6.14x5.67 Inches
Weight: 2.43 Pounds
Type: Does not apply
Brand: Saillong
