Description: Product Information:Product Model S9Engraving Size410*420mmEngraving MaterialsWood, Paper, Cardboard, Plastic, White, PCB Board, Aluminum Oxide, 304 Stainless Steel, Ceramic，Dark StoneCutting MaterialsWood, Acrylic, Cardboard, Fabric, Bamboo, Plastic Board, KT BoardLaser Effect PowerCutting Effect Compared to 90W CO2 LaserMachine Electricity Power30W (It has nothing to do with cutting or engraving performance,just electricity consumes)Diode Laser Power5.5-6W (Please note that this is light energy and not electric energy)Laser Wave Length 455±5nmEngraving Accuracy0.01mmFocusing MethodFixed Focus Laser + Sliding DeviceLaser Protective CoverThe light filter cover on the laser protects the user's eyes and prevents animals grabing the laser spot.Operating SoftwareLaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox, GrblController, L1teFire, support Windows system, support Apple system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.Data Transmission MethodUSB ConnectionPower SupplyInternational Universal StandardPower Input100-240V AC, 50/60HZPower Output12V 5AEquipment Net Weight3.0kgPackage Weight4.4kgPacking Size615*345*130mmCertificationCE FCC RoHS FDA IECFeatures:1. 90W Effect Laser Beam Shaping Technology: S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel, this is almost beyond the effect of 90W CO2 laser.2. Fast Focusing Design: S9 has the fastest focus design. The S9 laser combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete the focusing. This makes it very easy to use the laser .3. Solid and Easy-assembly Structure Design: The full-metal structure design makes the machine extremely solid, and it improves the accuracy of engraving. The whole structure is designed for easy-assembly, and the assembly can be completed in 10-20 minutes. The structural frame is very durab1e and remains open to upgrade. During use, you can keep the frame and replace with other new lasers. Or replace longer metal beams to expand the engraving area.4. New Eye Protection Design: The laser filter cover filters 98% of the ultraviolet light to the eyes. You and the people around you can watch laser engraving without wearing goggles. At the same time it can prevent animals from catching the laser spot.5. Wide Compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, L1teFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.6. Safe Design: The machine is equipped with a very convenient power switch, which is not available in others. Fixing holes are reserved on the four feet and the body structure to facilitate fixing the machine and the data cable.7. A4 Steel Pad: The free A4 size steel pad can protect the table from laser damage. Isolate fire hazards.8. Square Measuring Ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 410x420mm large-area engraving interval can meet your various engraving needs.S9 Pro Engraving Machine Packing List:1×X axis assembly2×X shaft2×Y shaft1×Control Box Module Set3×Support Feet1×Laser Module Set1×12V 5A Power Adapter1×Power Adapter1×USB CableStep 1~5 Screw Installation Package 2×Belt1×T-shaped M5 Screwdriver1×L-shaped M4 Screwdriver1xL-shaped M3 Screwdriver10xTie1×8-10mm Nut Wrench1×Brush1×Laser Goggles1×10x10cm Wood Chip 3mm Thickness1×10x10cm Wood Chip 10mm Thickness1×A4 Size Steel Desktop Protection PadNote:● For detailed machine instructions, please refer to the manual for parameter settings.● When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.● Please do not touch the laser emitter with your hand, or it may burn your hand.● Please avoid strong impact on the machine.● Children under 14 are not allowed to use this product and children over 14 need adult supervision.● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.More Details:
Price: 275 USD
Location: Dayton, New Jersey
End Time: 2024-10-31T03:29:12.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Laser Effect Power: Cutting Effect Compared to 90W CO2 Laser
Laser Wave Length: 455±5nm
Focusing Method: Fixed Focus Laser + Sliding Device
Cutting Materials: Wood, Acrylic, Cardboard, Fabric, Bamboo, Plastic Board, KT Board
Machine Electricity Power: 30W
Material: Wood, Acrylic, Cardboard, Fabric, Bamboo, Plastic Board, KT Board
Engraving Accuracy: 0.01mm
Data Transmission Method: USB Connection
Certification: CE FCC RoHS FDA IEC
Laser Protective Cover: Yes
Power Supply: International Universal Standard
Power Output: 12V 5A
Brand: N/A
Engraving Method: Laser
Type: Engraving Machine
Engraving Size: 410*420mm
Diode Laser Power: 5.5-6W (this is light energy and not electric energy)
Engraving Materials: Wood, Paper, Cardboard, Plastic, White, PCB Board, Aluminum Oxide
Packing Size: 615*345*130mm
Package Weight: 4.4kg
Power: 30W
Operating Software: LaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox, etc.
Power Input: 100-240V AC, 50/60HZ
Equipment Net Weight: 3.0kg
