Random Flow Dual Nozzles For Fluval Evo & Spec 13.5g 52l ONLY 1/4in RFG

Description: Each qty of 1 entered is for a PAIR (2) of small .25" nozzles that fit the stock output of the Fluval Evo & Spec aquariums. The nozzles are not meant to ride near the surface of the water as that will most certainly cause suction of air and create bubbles, you need to have them reasonably below the surface to avoid this. Are you looking to create a more natural environment in your reef, saltwater fish only or freshwater aquarium, then a Random Flow output nozzle is what will help you achieve those results. The nozzles create a turbulence that is not cyclical or patterned, which is more like natural water movement in the lake, rivers and oceans. These have been created to provide a snug fit that has been reinforced to avoid cracking. They are 3d printed with reef safe PETG filament and are made to order. In order to gain the maximum benefits, you will need stronger pump(s) to power these to their maximum potential. Photos in tank use are in my Fluval Evo 13.5g (black pair). Each and every nozzle is test fitted on a stock Fluval Evo output to make sure they fit correctly. With that said, Fluval has made running changes to their products and they may be slightly different from batch to batch. I include detailed instructions on how to make adjustments to tighten or loosen the fit if necessary, so please read them before installation to make sure you understand this. If you have never purchased any sort of Loc-Line based products or anything that uses a Loc-Line ball type mount for an aquarium, you need to understand how the measurements are figured. If you order a 1/4" nozzle for example, the opening in the base will be much greater because "All Loc-Line hose systems are measured by the smallest diameter hole through the part." That is a direct quote from their website. I have included photos of the 3 sizes I offer so you can see the opening sizes and the sizes of the ball the nozzle will seat on. I have had people make bad reviews because they don't understand this and claim I mail the wrong sizes. If you have any questions at all, please ask prior to ordering to alleviate any potential problems such as these. Also, please understand that the nozzles have NO MOVING PARTS. The blades don't spin, there are no gears and the way they work is by venturi turbulence. The nozzles create varying flow patterns, not streams or constant straight output. If you have any questions, feel free to message me and I will help the best I can. I go above and beyond in most cases to make sure you know precisely what you will be receiving and how everything functions. The .25" fitment is based on the Fluval flexible output fittings, these do NOT fit Loc-Line branded fittings. If you need the nozzle to fit the Loc-Line branded ball fitting, please see my other/future listing(s) for the correct fitment. Loc-Line brand flex fittings are slightly smaller and the nozzles will fit loose, if at all. Benefits Include:More natural water movementSnug fitting, no loose sloppy nozzlesCan be made to fit any systemEliminate bulky pumps from your display No more dead flow spots in your reef Printed In The USA (filament may be imported) Recommended Pump Output:1/4" need at least 100gph/379lph and optimum 145gph/549lph (per nozzle)1/2" need at least 150gph/568lph and optimum 400gph/1514lph (per nozzle)3/4" need at least 200gph/758lph and optimum 475gph/1798lph (per nozzle)

Price: 14.5 USD

Location: Moreno Valley, California

End Time: 2023-10-02T23:55:54.000Z

Shipping Cost: 0 USD