QIDI TECH X-Plus 3 3D Printer AutoLevelling 600mm/s Printing Speed 280*280*270mm

Description: Technology: FDM Build Volume: 280*280*270mm Printing Speed: ≤600mm/s Extruder Flow: 35mm³/s Extruder Temp: ≤350°C Hotend (Included): Copper alloy nozzle hotend for Common materials; Hardened steel nozzle hotend for Abrasive materials Auxiliary Part Cooling Fan: Yes Chamber Temperature Control: 65 Celsius Independent Chamber Heating Chamber Circulation Fan with Activated Carbon Air Filter: Chamber Circulation Fan Screen: 5.0-inch, 800*480 touchscreen Seal Print: Dryer Box + Desiccant Connection Options: 150M 2.4G WiFi; USB Flash Drive/Ethernet Cable Rated Power: 800W Recommended Filament: PAHT-CF, PET-CF, PA12-CF Compatible Filament: PLA, ABS, ASA, PETG, TPU, PC, UltraPA, Nylon, etc. Structure: CoreXY Z-axis: Double Z axis X-axis: High-grade hardness steel linear hollow optical axis QIDI TECH X-Plus 3 3D Printer, Auto Levelling, 600mm/s Printing Speed, Flexible HF Board, Chamber Circulation Fan, Filament Detection, Dryer Box, 280*280*270mm Highlights QIDI TECH X-Plus 3 Main Features QIDI Tech X-Plus 3 3D printer, a Fast and reliable FDM 3D printer for high-performance material, offers a super high printing speed of 600mm/s. With 20000mm/s² of printing acceleration and 35mm³/s extruder flow, the Klipper-based machine is undoubtedly the leading desktop high-speed FDM 3D printer sporting a CoreXY structure, 600mm/s print speed Klipper firmware High-temp printing Heated build chamber Automatic bed leveling Fast Speed 600mm/s 280*280*270 mm High-Flow 35mm³/s Acceleration: 20000mm/s² QIDI TECH X-Plus 3 3D printer comes with: Two high-temp hotends Dryer box Spool of filament All the necessary tools New Upgrade All-metal Frame QIDI TECH X-Plus 3 features an all-metal chamber that is ultra-stable, reinforced with metal crossbeams at the bottom, and resistant to deformation. 64-Bit Processor For a higher printing speed and improved printing results, QIDI X-Smart 3 adopts Cortex-A53 64-bit processor, which has a 1.5Ghz frequency, 8G-EMMC, and 1G DDR3. CoreXY Structure With TMC2209 silent drive and CoreXY structure, this 3D printer can reduce motion Inertia and improve the motion speed, offering a low-noise printing experience. High-grade Hardness Steel Linear Hollow Optical Axis Improved surface straightness, and a 60% lower error deflection. Highly durable and has no need for frequent maintenance. High-Speed Extruder with Cooling System The extruder with a 9.5:1 transmission ratio is steadier, stronger, and faster. The new cooling system can reduce the risk of clogs and ensure smooth extrusion. Automatic Levelling Klipper adaptive meshing and purging, fast ensure flawless first layer for every 3D print. Flexible HF Board The double-sided flexible magnetic HF plate has excellent adhesion, no warping trouble, and is easy to remove the prints. Two Sets of Hot End Copper alloy nozzle for better thermal conductivity, smooth printing and to be more durable. Hardened steel nozzle for abrasive materials, and long-term usage. While both have a max print temp of 350 Celsius. Temperature Controlled Chamber and Drying Box With an independent heating device that has a maximum temp of 65 Celsius, QIDI X-Plus 3 3D printer can high-efficiency print PET-CF, PAHT-CF, etc. It also has a chamber circulation fan with an activated carbon air filter. No Layer Separation The higher the temperature in the heated chamber, the larger the material range that can be printed. The heated chamber ensures that the part is built uniformly without the generation of internal stresses. Excellent User Experience The highly acclaimed QIDI slicer software has both normal mode and expert mode, which is also easy for beginners to get started. It also supports other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc. QIDI Tech X Plus 3 - Designed for High-Speed Printing The successor to the X-PLUS 3D printer, the QIDI Tech X-PLUS 3 is similar to the more advanced X-MAX 3 but with a slightly smaller build volume and the lack of a carbon air filter. The printer comes fully assembled and is quick and easy to set up and use. The QIDI X-PLUS 3 sports a CoreXY structure to avail extremely fast printing speeds of up to 600 mm/s and acceleration of 20000 mm/s². The Klipper firmware makes it possible to enable resonance compensation so as to reduce vibrations at high speeds. Another way to achieve faster and smoother movements comes from the application of carbon rods on the X-axis and a lightweight extruder, which allows reducing the weight of the printhead with the X-axis to only 600 g. The auto bed leveling function uses a capacitive sensor to probe the print bed in 16 points to ensure the build plate flatness and good print adhesion. The enclosed build chamber of the X-PLUS 3 sports an independent heater and can reach 65 °C, which reduces warping and delamination with high-temperature filaments. The transparent lid of the printer can be removed for faster part cooling when printing with low-temperature filaments, such as PLA. Supreme Print Quality & Compatibility with Nylon, PC, Fiber-reinforced Composites The QIDI Tech X-PLUS 3 equips a direct drive extruder with a 9.5:1 gear ratio and a maximum flow rate of 35 mm³/s. With a max temperature of 350 °C, the printer provides a fast heat-up time and consistent extrusion. Apart from the default copper alloy nozzle for processing common filaments, the QIDI Tech X-PLUS 3 is supplied with a hardened steel nozzle for printing with abrasive materials. A standard 0.4 mm nozzle can be replaced with optional 0.2, 0.6, or 0.8 mm nozzles. With a minimum layer height of 50 microns, the X-PLUS 3 produces accurate models with a smooth surface finish. The print bed heats up to 120 °C and features a magnetic flexible build plate that ensures good adhesion and easy print removal. Thanks to its high-temp extruder and heated build chamber, the X-PLUS 3 is compatible with a wide range of consumer and engineering-grade thermoplastics, including Nylon, PC, fiber-reinforced composites, and others. The printer is compatible with both proprietary and third-party filaments. Printer controls and QIDI Print software The QIDI X-PLUS 3 is controlled via a 5" color touchscreen with an intuitive user interface. The machine supports Wi-Fi, Ethernet, and USB connectivity. Based on the popular Cura slicer, the QIDI Print software has normal and expert modes to provide maximum flexibility both for beginners and experienced users. It runs on Windows, macOS, and Linux. The printer is also compatible with Cura, Simplify3D, or PrusaSlicer. Specification General Brand: QIDIType: 3D PrinterModel: X-Plus 3Color: Black Specification Technology: FDMBuild Volume: 280*280*270mmPrinting Speed: ≤600mm/sExtruder Flow: 35mm³/sExtruder Temp: ≤350°CHotend (Included): Copper alloy nozzle hotend for Common materials; Hardened steel nozzle hotend for Abrasive materialsAuxiliary Part Cooling Fan: YesChamber Temperature Control: 65 Celsius Independent Chamber HeatingChamber Circulation Fan with Activated Carbon Air Filter: Chamber Circulation FanScreen: 5.0-inch, 800*480 touchscreenSeal Print: Dryer Box + DesiccantConnection Options: 150M 2.4G WiFi; USB Flash Drive/Ethernet CableRated Power: 800WRecommended Filament: PAHT-CF, PET-CF, PA12-CFCompatible Filament: PLA, ABS, ASA, PETG, TPU, PC, UltraPA, Nylon, etc.Structure: CoreXYZ-axis: Double Z axisX-axis: High-grade hardness steel linear hollow optical axisFirmware: KlipperPrinting Acceleration: 20000mm/s²Printing Accuracy: ±0.1 mmFilament Diameter: 1.75mmBed Leveling: Automatic LevelingExtruder Transmission Ratio: 9.5:1Hot End: Ceramic Heating CoreExtruder: High-flow Direct Drive ExtruderNozzle Diameter: 0.4mm (0.2,0.6,0.8mm Optional)Hot Bed Temperature: ≤120 CelsiusPrinting Plate: Double-Sided Flexible Magnetic HF PlateFilament Detection: YesResonance Compensation: YesPressure Advance: YesVoltage: 100-240VAC, 50/60HzMain Processor: Cortex-A53, 64-bit Processor, 1.5Ghz,8G-EMMC,1G DDR3Slicer: QIDI Print and other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.Operating System: Windows, MacOS, LinuxAssembled: Assembled and First Print within 10 minutes Weight & Size Product Weight: 24.3kgPackage Weight: 25kgProduct Size(L x W x H): 511x527x529mmPackage Size(L x W x H): 630x630x650mm Package Contents 1 x 3D Printer1 x Dryer Box1 x 500g Filament1 x Filament Spool Holder1 x Holder Cover1 x Power Cord3 x Allen Key (H1.5, H2, H2.5)1 x 7mm Spanner1 x Flat Head Screwdriver1 x 0.4mm Nozzle Cleaning Tool1 x Desiccant1 x Ethernet Cable1 x Scraper1 x Glue Stick1 x USB 2.0 Flash Drive1 x Spare Parts Kit1 x Ordinary Hotend1 x User Manual

Price: 839.51 USD

Location: Riverside, California

End Time: 2024-08-28T09:40:54.000Z

Shipping Cost: 0 USD