Description: Simple and slim. This air assist takes up almost no real estate on your module. It conveniently attaches to the already existing threaded holes in the bottom of your Laser Master 2 Pro Model module. Ortur Laser Master 2 Pro only. This will not fit the regular LM2 modules as they do not have the holes on the bottom. If you are looking for an air assist for the regular LM2 model, please see our other listings. OPTIONAL SPACER AVAILABLE FOR FIXED FOCUS MODEL 50MM (To Replace included metal cylinder) Get deeper cuts by removing the debris with our air assist. Cleaner engravings and overall better performance. If you have shop air, we recommend between 20-25psi. Small pumps will show great improvement as well but not as good as the larger pumps. Checks the links below if you still need a pump. If you need air hosing as well, please visit this listing (where it is included): https://www.ebay.com/itm/334085465089 We prefer the side air style over the lens covering style. The venturi effect, that makes the nozzle a vacuum, can start pulling smoke in, dirtying your lens faster. The K40 community experienced the same evolution. There are also problems with moisture and "over the lens" air assists, if not properly maintained. Tools Required:2mm allen wrench Install:-Fasten both attachment brackets to the module's threaded holes with the provided M3 screws-arrange and fasten in all of your adjustable links, hose mount, and air nozzle-Install your 6mm hose (sold separately)-Guide hose up to the stepper area-Secure hose with zip ties to the wire loom-Place Nozzle at 45 Degrees 2-3mm from laser dot on workpiece. King Gubby Designs has been solving problems for lasers printers for a few years now. When we encounter a consistent problem or design flaw with a machine we use, we get to work coming up with a solution. This product is one of those solutions. We hope you enjoy it. *The laser and hose shown is for illustrative purposes only and is not part of the offer.**The laser module in the above images may differ from the pro model but is used for illustrative purposes (This product is for the Pro Model!)
Price: 15.99 USD
Location: San Diego, California
End Time: 2024-09-22T05:49:52.000Z
Shipping Cost: 10.4 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Country/Region of Manufacture: United States
Machine Operation: Air
Custom Bundle: No
Material: Plastic
Type: Engraving Machine
Tool Type: Attachment
Engraving Method: Laser
MPN: Does Not Apply
Brand: King Gubby Designs (For Ortur)
