NSI IPCS1002 Insulation Piercing Connector 1/0-8AWG 600V, TTD 1010 F

Description: NSI IPCS1002 IPCS Series Easy-Tap Insulation Piercing Connector, 1/0-8 AWG Main and 2-10 AWG tag Conductor Range, 1.8" Width, 3.1" Height, 2.2" Length Description This NSi Industries IPCS1002 Easy-Tap insulation-piercing connector is suitable for tapping or splicing electrical lines in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. It can be used on main lines from American Wire Gauge (AWG) 1/0 to #8 with tap lines from #2 to #10 AWG. It is fully insulated and can be used on energized conductors as long as the tap line is not under load. Double shear-head bolts ensure that the proper amount of torque is applied during installation. This connector is not recommended for use with extra-flexible cables and is not approved for submersible applications. It is rated for 600V and 90 degrees C and meets American National Standards Institute (ANSI) C119.4 requirements and is Underwriters Laboratories (UL) 486B Listed. This insulation-piercing connector is suitable for a wide range of electrical line tapping and splicing applications with appropriately sized conductors. Specifications Main line size range1/0 to #8 AWGTap line size range#2 to #10 AWGCopper current rating190 ampAluminum current rating150 ampVoltage rating600VTemperature rating90 degrees CDimensions*3.1 x 1.8 x 2.2 inches (H x W x L)Standards metANSI C119.4, UL 486B Listed * H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back. NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.

Price: 29.99 USD

Location: Tarboro, North Carolina

End Time: 2024-02-22T17:55:55.000Z

Shipping Cost: 0 USD