Malco FCG2 Fiber Cement Siding Overlap Gauge Set (Pack of 2)

Description: Product Description Works with 5/16 inches (7.9 mm) fiber cement siding. Permits 1-person application of panels. Two gauges support entire length of panel and precisely gauge a standard 1-1/4 inches (31.2 mm). From the Manufacturer Malco FCG2 1-1/4 Inch Overlap 5/16-Inch Thickness Fiber Cement Siding Gauges are used to permit one-person application of fiber cement siding by completely freeing the installer's hands. Two gauges support the length of plank and precisely gauge a standard 1-1/4-inch overlap in one easy step even on a bowed wall. No adjustments to make and nothing to mark. To use the plank gauges simply place a pair of gauges on the top edge of the lower plank then place the next plank on the gauges. Nail the plank in place leaving an area of about 18 inches over each gauge unnailed. Remove the gauges by depressing the thumb tab to allow the plank to go flush to the wall/gauge, lift the gauge up, pull out then down. After removing the gauges complete nailing the plank and hang the gauge on the new plank. Gauges are durable, made from one piece tempered spring steel. Precision ground tip assures gauge will grip behind siding. 2 gauges per package. Allows 1-person installation of siding planks Two gauges support the entire length of plank and precisely gauge a standard 1-1/4-Inch overlap - even on a bowed wall No adjustments to vary and nothing to mark Works on old or new 5/16-Inch fiber cement siding plank Will not mar finish of pre-painted siding Made in the USA

Price: 54.24 USD

Location: Casper, Wyoming

End Time: 2024-02-10T22:30:24.000Z

Shipping Cost: 0 USD