MagCAD SRAM AXS Blips TT Mounts - 24mm - Time Trial Wireless Deda Extensions

Description: Features:Mount you SRAM AXS Wireless Blips to TT extensions measuring 24mm external diameter.Robust and securing, positioning your SRAM AXS Blips right at your fingertips.Weighs 26 grams (each) without hardware, 31 grams (each) with hardware.Please Note: The SRAM Axs Blips and TT extensions pictured are for reference only and not included. What's Included2x 3D printed mounts including expanding plugs.2x M4x45mm cap screws.2x M4 Nyloc nuts.2x O-rings.OverviewThis pair of mounts allow you to attach a set of SRAM AXS Blips to the front of your TT extensions. They replicate a bar end plug to minimise aerodynamic impact whilst keeping your SRAM AXS Blips held secure and right at your fingertips. These work fantastic on a time trial specific bike setup for speed or normal road bike fitted with TT extensions for endurance & comfort. These mounts are designed for TT extensions measuring 24mm external diameter and 20.5mm minimum inner diameter, typical of Deda TT extensions. ApplicationTo fit your SRAM AXS Blip to the 3D printed mount:Locate the tab on the bottom of the SRAM Blip into the 3D printed mount.Push the Blip into the mount so it sits flush.Stretch the rubber O-ring, supplied, over the 3D printed mount and Blip, ensuring it sits correctly in the groove and the Blip is held securely.To fit the mount to your TT extensions:Locate the wedge with a hex slot on one face and install the M4 Nyloc nut, supplied.Pair this wedge with the second wedge so the angled faces join, forming a complete cylinder.Install the wedges into the bar end, so the groove on one side of the cylinder locates in a slot inside the bar end. Rotate the wedges until you feel it locate vertically.Install the M4x45mm cap screw through the front of the bar end, through the wedges and into the M4 Nyloc nut.Loosely tighten the M4 cap screw until the wedges begin to expand in diameter.Install the 3D printed assembly onto your 24mm TT extensions and tighten the M4 cap screw until the mount does not move on your bars. Minimal torque, approx. 0.5Nm, should be required if the assembly is correct.Periodically check the mount remains secure.MaterialMagCAD Mounts are 3D printed in Nylon PA12. However these are not your typical home 3D printers. Following a process of SLS (Selective Laser Sintering) on industrial size printers, costing anything above £100k, the resulting mounts have fantastic resolution and refinement. The surface finish is slightly rough with a matte effect and the performance of the mounts are comparable to injection moulded parts. Customisation As with all MagCAD items it's more than possible to tweak or change the design to suit your particular installation. Feel free to get in contact for more details. About Me I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others. DeliveryAll items in stock and dispatched promptly, usually the same day. ReturnsShould you have any issue or just change your mind we're happy to accept returns within 30 days, providing the item is unused.

Price: 34.99 GBP

Location: Leek

End Time: 2024-10-17T14:26:21.000Z

Shipping Cost: 19.12 GBP