Lot of 24 Lion of Judah, roots, reggae, Rastafari, lion, Haile Selassie, decals

Description: Lot of 24 Lion of Judah, roots, reggae, Rastafari, lion, Haile Selassie, decalsThe approximate measurements of each sticker are 1 in H. x 1.12 in. W you will recieve 28 of them. If you would like a color other than the glossy black shown please send a message with your purchase specifying the specific color or I will send you the glossy black. You can see the list of colors I have in the picture area. These stickers will come on one sheet with application tape applied you then can cut them out and put them on whatever you like. On the sticker everything white behind the art represents the backing of the sticker or what it would look like on a white background. These are die cut. The sticker designs are brought courtesy of Cut Ready Clip art, or my own personal designs, or a little of both. I cut the decals myself from Oracle vinyl, which is of intermediate grade quality; it will last quite awhile outdoors and very long indoors. Please check out the specs from Oracle’s site for specifics on the material. Please read or watch a tutorial online to learn how to apply a vinyl sticker. I will apply the application tape for you so it will come on top of the sticker and looks like masking tape. You can use soap and water to apply it, for instance on a window, or for regular dry application. Please reador watch a tutorial online to learn how to apply a vinyl sticker in addition toreading this it may help to see someone do it, if it is your first time. I also included step by step instructions below.Equipment NeededA credit card or avinyl squeegee, and application tape.How to apply sticker: The idea is the tape applied to the top of the sticker will hold everything in place while you safely pull off the backing of the sticker.If you need anything specific with a sticker, custom sizes or designs, colors, let me know. Thanks again. Email me if you have any questions about applying the sticker or using the included application tape. Paulie4000Steps:1. Apply pressure over the whole sticker with the credit card or squeegee. (application side up) Flip over.2. Pull off the backing of the sticker. This is the waxy piece of paper underneath your sticker. Be careful as you pull off the backing making sure everything is sticking to the app tape, when finished be careful the app tape and sticker will stick to anything like crazy.3. Line up sticker properly; place one side down, then slowly credit or squeegee from the side you put down all the way to the other side until the whole sticker is down. Go over the whole sticker pushing out any air bubbles or parts that are not all the way down. 4. Carefully and slowly pull off the application tape making sure all sticker parts are staying on the medium you are applying the sticker to. If something not sticking (which is rare, usually only for real small pieces) go back and reapply pressure with squeegee or creditcard directly on part not sticking and then try again, repeat until stuck down.5. Go over the whole sticker lightly with squeegee or credit card.For wet application1.Spray the surface that you want the sticker to be approximately, with soap and water.2. Place sticker over the sprayed area and slide around until in correct spot, do this quickly, it will start to stick. Once the sticker is where you want it…3. With squeegee, or creditcard, start pushing and pulling the water out from under the sticker with the edge of the card or squeegee, keep doing this tell no bubbles and almost all the water is out. 4. Carefully pull application tape off, making sure it isn’t taking off any of the sticker. 5. Wipe down with soft cloth and let dry.Congratulations on applying your sticker! If you need anything specific with a sticker, custom sizes or designs, colors, let me know. Thanks again. Email me if you have any questions about applying the sticker or using the included application tape. Paulie4000

Price: 2.74 USD

Location: La Mesa, California

End Time: 2024-08-28T17:36:25.000Z

Shipping Cost: 0.5 USD