Lockheed L-1011 (L1011) TriStar Delta Airlines 1/500 Scale Diecast Model

Description: 1:500 Scale Diecast Metal – Lockheed L-1011 TriStar – Length: 4" Wingspan: 4” This L-1011 model is made to be displayed with the landing gear in the extended position. The model is already assembled and painted. That is shown in the photos is how the model will look like when taken out of the box. The box is labeled as Adult Collectible Model and Recommends 14 and older. Although it is a small scale, the details are very impressive. The engines are part of the wing assembly, which in turn is one single piece. There are very few gaps and/or joints in this model. A stand where the model can be attached for display is included and the model's info (type of airplane and scale). The maker of the model really did a good job with the model, the panel lines and details are very clear and crisp.What really caught my attention, however, is the way the markings and coloring. Look at the photos and you will see very clear and crisp nose art and markings. The box measures 6" x 6" x 3" The Lockheed L-1011 TriStar, commonly referred to as the L-1011 (pronounced "L-ten-eleven") or TriStar, is an American medium-to-long-range, wide-body trijet airliner by Lockheed Corporation. It was the third wide-body airliner to enter commercial operations, after the Boeing 747 and the McDonnell Douglas DC-10. The airliner has a seating capacity of up to 400 passengers and a range of over 4,000 nautical miles (7,410 km). Its trijet configuration has three Rolls-Royce RB211 engines with one engine under each wing, along with a third engine center-mounted with an S-duct air inlet embedded in the tail and the upper fuselage. The aircraft has an autoland capability, an automated descent control system, and available lower deck galley and lounge facilities.

Price: 38.99 USD

Location: Chicago, Illinois

End Time: 2024-11-15T04:30:57.000Z

Shipping Cost: 0 USD