KB Electronics KBIC-225 SCR Chassis Drive, 9432, 1/50-3HP @ 230VAC 50/60Hz Input

Description: This item requires a Plug-In Horsepower Resistor to run! Please use the chart below to select the right size for your application! Description: The KBIC® full-wave DC motor speed controls are designed for applications demanding excellent performance, high reliability and low cost. Although compact in size (only 4.30" x 3.64" x 1.25"), these controls offer better than 2% regulation over a 50:1 speed range. The controls are fabricated with components which have proven reliability, including MOV transient protection, which is used to protect the power bridge. Integrated circuitry is used to provide a non-complicated design with superior load and line voltage regulation. Electronic current limiting (CL) protects the motor and control against overloads by limiting the maximum level of output current. Acceleration start (adjustable from .5 to 4 seconds) provides a smooth start each time the AC power is applied. A unique feature of the KBIC® controls is the Plug-in Horsepower Resistor®. It eliminates the need for recalibrating IR Comp and Current Limit when the control is used on various horsepower motors. Additional versatility is achieved by using the Auxiliary Heatsink (optional) which is used to double the horsepower rating of each model. The output of the control is a linear function of potentiometer rotation. The KBIC® can also be operated in a voltage following mode by supplying an isolated analog signal (0 – 9VDC) to the input terminals P2 (+) and F-. The controls are terminated as standard with Q-D terminals. A Barrier Terminal Accessory Kit is available which incorporates both line and armature fuses. The Inhibit™ circuit (terminals I1 and I2) is provided to electronically disconnect the armature output voltage. Another standard feature is Auto Inhibit®. This circuit prevents false starts and high surge currents when cycling the KBIC® control with the AC line. A variety of models are provided with choices of voltage and current ratings. Included with the controls are a 5K remote potentiometer, mounting hardware and operating instructions.Standard Features:Plug-in Horsepower Resistor® (see chart) allows a single model to be used on a wide range of motorsMOV Transient ProtectionTrimpots: MIN, MAX, ACCEL, IR & CLVoltage FollowingInhibit™ and Auto Inhibit® Specifications:BrandKB Electronics (Nidec)Part Number9432Model NumberKBIC-225Maximum Rating1-1/2 HP (without Auxiliary Heatsink) 1.13 kW (without Auxiliary Heatsink) 3 HP (with Auxiliary Heatsink) 2.25 kW (with Auxiliary Heatsink)Input208-230 Volts 50/60HzMax Line Current12 AC Amps (without Auxiliary Heatsink) 24 AC Amps (with Auxiliary Heatsink)Motor Voltage Range0-180 VDCField Voltage (Shunt Wound Motor Only)100, 200 VDCMax Load Current8 DC Amps (without Auxiliary Heatsink 16 DC Amps (with Auxiliary Heatsink)Net Weight0.58 lbs (without Auxiliary Heatsink) 0.26 kg (without Auxiliary Heatsink) 2.5 lbs (with Auxiliary Heatsink) 1.14 kg (with Auxiliary Heatsink)Dimension Reference Code”A” (without Auxiliary Heatsink) ”B” (with Auxiliary Heatsink)Dimensions4.30" x 3.64" x 1.25" (LxWxH) Without Heatsink 7.00" x 6.25" x 2.625" (LxWxH) With HeatsinkSpeed Range (Ratio)50:1Load Regulation (% Base Speed)1 (0 – Full Load, 50:1 Speed Range)Line Voltage Regulation (% Base Speed)1/2 (At Full Load, +/- 15% Line Variation)Control Linearity2 (% Speed vs Dial Rotation)CL/Torque Range0-300 % Full LoadAcceleration Time Range0.5-4.0 SecondsMinimum Speed Trimpot Range0-30 % Full SpeedMax Speed Trimpot Range50-140 % Full SpeedMax Allowable Ambient Temperature at Full Rating45°C 113°F Applications:ConveyorsPackaging MachinesFeedersWelding PosistionersPumpsMachine ToolsExercise EquipmentScreening and Printing EquipmentPlug-In Horsepower Resistor Chart:230VAC IN 0-180VDC Out Motor HPApprox Motor Current (DC Amps)Resistor ValueKB Resistor Part Number1/500.11 Ohm98331/250.20.51 Ohm98341/150.350.35 Ohm98351/100.50.25 Ohm98361/60.80.18 Ohm98371/41.30.1 Ohm98381/22.50.05 Ohm98393/43.30.035 Ohm984015.00.025 Ohm98411.57.50.015 Ohm98422 *10 *0.01 Ohm98433 *15 *0.006 Ohm9850* Requires optional Auxiliary Heat Sink (KB Part Number 9861) Office

Price: 115.97 USD

Location: Stevens, Pennsylvania

End Time: 2023-12-07T15:05:42.000Z

Shipping Cost: N/A USD