JAMMA Sega Genesis Controller Adapter for Capcom CPS1/CPS2/CPS3 Arcade

Description: JAMMA GENESIS CONTROLLER with CPS1 and CPS2 Pass Thru Harnesses Pass Thru Adapter for any standard JAMMA PCB. Simple install between the cabinet harness and JAMMA PCB. Allows for up to 2 original Sega Genesis controllers (3-button and 6-button controllers) to be used in your arcade application. Added functionality for CPS1/CPS2/CPS3 JAMMA PCBs! Full support with pass thru cables for CPS1/2/3 kick harnesses! Simply plug your existing CPS kick harness into the appropriate header pin section and then connect the appropriate pass thru cable to your Capcom PCB -- that's it! Instantly utilize all buttons on your Genesis controller in your arcade cabinet! Also great for test bench setups -- no need to have your test station wired for CPS1/2/3 kick harness. These controllers will now be able to access those buttons by simply connecting the desired pass thru harness. No modifications required to your machine. Original arcade control panel will still be active and function at all times, so that you can switch back and forth as desired. See instructions and diagrams for exact button mappings. Will work with standard original Sega Genesis controllers - both the original 3-button style and the later 6-button style. Has been successfully tested and found to work with numerous aftermarket Genesis controllers (primarily the Retrobit 6-button versions and Hyperkin brands). Also has been tested with standard Sega Genesis controller extension cords -- just in case your JAMMA board is mounted at the back of the cabinet and you need extra length to reach to the front of the machine. **Sega Genesis Controllers and Capcom PCBs are not included -- only pictured to show installation.

Price: 105 USD

Location: Palos Park, Illinois

End Time: 2024-08-16T15:48:23.000Z

Shipping Cost: N/A USD