Description: This gear made of cased hardened Steel then nitriding the surface. It's has very tough core inside and high hardness on the surface for wear proof. Replacement spur gear for Traxxas E Revo2, X-Maxx 6S and 8S, and XO-1. Tooth: 54TPitch: 1.0 metric pitch (M1, Mod1)Outer diameter: 56mmThinkness: 8mmWeight: 54g Requirements:Do NOT use the pin system for setting the X-Maxx gear mesh. Please manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
Price: 28.98 USD
Location: Diamond Bar, California
End Time: 2024-08-14T01:58:59.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Compatible Fuel Type: Electric, Gasoline
Compatible Brand: For Traxxas
Type: Spur Gear
MPN: SG-PRO-M1-54T
Compatible Vehicle Type: Cars, Trucks & Motorcycles
Compatible Scale: 1:5
Age Level: 17 Years & Up
Brand: GDS Racing
