Fuel Injector Tester Diagnosis DIY Cleaning Tool Kits Short-circuit Protection

Description: Product Feature ✨Car Fuel Injector Tester:This injector tester is 41.5cm / 16.3 inches and can test lead. It can work with any fuel pressure tester. 🔔NOTE: Gasoline cars only, NOT for diesel engines.✨4 Pulse Modes:The injector Tester comes with an LED display and 4 pulse modes - Single / Short / Long/ Continuous modes. It can help you identify whether the injector is good or not when you switch off the engine.✨Easy to Use:You can use it to test each injector individually to help identify stuck, leaking or burnt-out conditions. It works with the engine off and a pulse timer may be used with a fuel pressure gauge.✨The mode lock feature ensures test condition uniformity.✨Use a 12V vehicle battery as a power supply. How To Use 📝Operating Instruction:1️⃣Turns off the engine of the car2️⃣Remove the wire plug with the fuel injector to be tested, and then connect the two pulse output terminals of the instrument with the fuel injector of the vehicle.3️⃣Connect the red clip of the instrument to the positive pole of the 12 V automobile battery, and connect the black lip of the instrument to the negative pole of the battery.4️⃣Press the “Mode set ” key to select the required pulse signal output mode, and the screen will display the currently selected mode.5️⃣After selecting the required pulse signal output mode, press the “Pulse ” key, the instrument will output pulse to the fuel injector to be tested, and the signal indicator will be on when the pulse is output.6️⃣After the test is completed, if it is necessary to repeat the test, press the “ Pulse ” key; if you want to change the pulse, press the “ Reset ” key, you can select the required mode at will, and then test the fuel injector again. Others 📝The different models are explained as follows1. Mode “1”: single pulse mode. In this mode, when the “ Pulse ” key is pressed, the instrument will send out a pulse with a pulse width of about 255 Ms.2. Mode “2”: short pulse mode. In this mode, when the “ Pulse ”key is pressed, the instrument will send out 50 pulses with a pulse width of about 7 Ms.3. Mode “3”: long pulse mode. In this mode, when the “ Pulse ”key is pressed, the instrument will send out 100 pulses with a pulse width of about 3.5 Ms.4. Mode “4”: continuous pulse mode. In this mode, when the “ Pulse ” key is pressed, the instrument will continuously output pulses with a pulse rate of about 50 pulses per 1450 Ms and a pulse width of 7 Ms. Note 🔔1. The engine of the car must be turned off before using this instrument.🔔2. Do not smoke or ignite near the car.🔔3. Don’t splash the fuel on the hot engine parts. Product Specification Power Supply12V vehicle battery(NOT Included)Operation Environment0-40°C,relative humidity < 80%Storage Environment-10°C ~50°C, relative humidity<85%Test Cable Length41.5cm/ 16.3 inches Package Included 🎁 1 x Fuel Injector Tester🎁 1 x English Manual Location Descriptions To improve your buying experience and ensure fast delivery, Your order will be shipped from the warehouse located in either new jersey or california that is closest to your address. If you have any questions, Please contact us. Thank you for your support ! Support & Share

Price: 18.04 USD

Location: Houston, Texas

End Time: 2024-10-19T01:27:35.000Z

Shipping Cost: 2.5 USD