EID RS30 7300A | WASHER DISPENSER ACTUATOR OEM ***FREE 1 YEAR WARRANTY*** st

Description: EID RS30 7300A WASHER DISPENSER ACTUATOR OEM ***FREE 1 YEAR WARRANTY*** st Check your part number thoroughly and carefully. The numbers must match down to the last digit! Merely matching the model number is not enough! WASHER DISPENSER ACTUATOR - OEM - used PRINTED INFORMATION ON PLASTIC: EID RS30 7300A <----- IF THIS NUMBER DOES NOT MATCH, IT'S CERTAINLY THE WRONG PART 120V 60Hz T.85 X-XX/XX/XX (this is a date code which may vary by each individual unit) INFORMATION ON METAL: XX/XX/XX X:XX (this is a date code which may vary by each individual unit) B 110/127 V 50/60 Hz 4W Images may be STOCK IMAGES and not of the actual item which you are purchasing, which may differ only in cosmetic wear, but is fully operational and functions as intended. Not sure if this is the right part?Message us your part number or take a photo of the label on the part Check photos and description!1-Year WarrantyCondition DescriptionInstallationCheck photos and description!1-Year WarrantyCondition DescriptionInstallation CHECK THE PART NUMBER AND PHOTOS CAREFULLY! You need BOTH: #1 Make certain that the PART NUMBER of the listing matches the number on your old part down to the digit. Merely matching the model number is not enough. #2 Verify the photos to make sure that all needed wires are included and intact, and that all necessarily wire terminals and plugs and sockets are available, and that the part matches visually as well. (Also verify the typed numbers in the description with the photos of the label incase of an accidental typo.) (When we list part information, we are not always certain how relative every single number on the label is, as some numbers may simply be the date of production of that particular unit. We try to designate the primary part number, but the verification of the rest of these numbers is the responsbility of the buyer.) Compatibility issues are the responsibility of the buyer. We are not responsible for the accidental purchase of a part incompatible with the machine or whatever you need it for, or if it did not fix/solve your problem, or if you decided not to use the part, or if the manufacturer or another website claimed compatibility, etc. Again, it is the responsibility of the buyer to correctly diagnose their machine. ***ALL SALES ARE FINAL*** ...under the condition that the sold unit is a functional (i.e. not defective) part (which would be covered by the 1-year warranty). Some parts may be missing wires or have some wires cut that the buyer may be required to splice together. Used parts may also be subjected to some cosmetical wear. Check the photos carefully to see what is included in each listing. ***Not all parts will work with all machines!*** Your product comes with a free 1-Year Warranty! This product comes with a 1-Year warranty. The warranty ensures coverage of the functionality of the part only. It does not include coverage of cosmetic damage of any kind or the function of any attached accessories to the part such as wires, etc. **Please note: 1-Year Warranty does not cover any of the following situations (but is not limited to): the buyer altering or tampering with the product in any way other than what is necessary for installation, or for damaging the product by failure to correct the original problem which caused the old part to fail, or failing to provide information to follow warranty steps, or failing to return items when problems arise, or misleading the seller/withholding payment/abusing the transaction in any way. The warranty also does not cover any situations related to the buyer purchasing the incorrect part to fix his machine, a buyer changing his mind after the shipment of the part or deciding to purchase another machine instead, or the part not being able to be used in the expected way, or any other compatibility issues. It is the buyer's responsibility to correctly diagnose his problem. This is to ensure and promote correct usage of the product. If our part fails within 1 year, either a replacement part will be sent, or a refund will be given. (Our choice.) If the part fails within 3 months of purchase, shipping costs for returning the part will be paid by the seller. If the part fails after 3 months but within 1 year, the return shipping of the old part may be required by the buyer. In such case, the shipping for the replacement part to the buyer will be paid by the seller. Used: All parts may have been previously used, and therefore may show signs of cosmetic wear. Some used parts may be missing a necessary wire for installation, or may have cut wires requiring splicing. We do our best to provide accurate information and photos regarding the condition of each product, but we may miss small details. Therefore please look closely at the photos before buying. New other (see details): This item was taken from a brand new machine and was never used or tampered with. It is not in the original packaging, so there may be signs of cosmetic wear. We do our best to provide accurate information and photos regarding the condition of each product, but we may miss small details. Therefore please look closely at the photos before buying. New: This item was brand new in the packaging. It may have been removed ONCE solely for verification and photos. **Please keep in mind that changes in lighting can affect the appearance of certain items. Scratches/dents and the like may not be noticeable in the photos but may show up once installed in your home. Please understand that we want to give you the best representation possible of any item you purchase, so feel free to ask in-depth questions about any item before buying if you are concerned about condition, and we will do our best to answer as accurately as possible! INSTALLATION & RECALIBRATION Many appliance parts, especially electronic control board parts, may store fault or error codes. Most of these errors need to be "cleared" from the appliance after the new part is installed and before the new part will work properly. Unfortunately, no appliance manufacturer has a standard recalibration process. You will need to search by your MODEL number plus the error description to try to find this process and if it is necessary for your particular machine model, or to consult the owner's manual. ONLY A SYMPTOM? Before installing the part, make sure that the part to be replaced is the ONLY issue with the machine. Some parts go bad because they are a symptom and not the actual problem. If the old part is replaced with a brand new part, it will go bad again. For example, some machines have a situation that when the pump fails it also takes out the fuse on the mother board. Therefore, if the board were to be replaced solely, the pump would blow that fuse again. Purchase of our products means that you have read, understood, and agreed to our policy. Thank you! FREE shipping on almost all parts! There is a one day handling time on most parts, and up to a 3-4 day handling time on most motors (as most motors must be physically dropped off shipped FedEx or UPS, which may happen one or two times per week). **Shipping to US territory only. **NO international orders under any conditions. Shipping We are a top-rated family-owned major appliance discount retail store located in Grand Rapids, MI. We specialize in Scratch & Dent, certified refurbished machinery, and appliance parts & accessories. About Us Questions?Reach out via eBay messagesWASHER DISPENSER ACTUATOR - OEM - used PRINTED INFORMATION ON PLASTIC: EID RS30 7300A <----- IF THIS NUMBER DOES NOT MATCH, IT'S CERTAINLY THE WRONG PART 120V 60Hz T.85 X-XX/XX/XX (this is a date code which may vary by each individual unit) INFORMATION ON METAL: XX/XX/XX X:XX (this is a date code which may vary by each individual unit) B 110/127 V 50/60 Hz 4W Images may be STOCK IMAGES and not of the actual item which you are purchasing, which may differ only in cosmetic wear, but is fully operational and functions as intended. EID RS30 7300A WASHER DISPENSER ACTUATOR OEM ***FREE 1 YEAR WARRANTY*** st Check your part number thoroughly and carefully. The numbers must match down to the last digit! Merely matching the model number is not enough! WASHER DISPENSER ACTUATOR - OEM - used PRINTED INFORMATION ON PLASTIC: EID RS30 7300A <----- IF THIS NUMBER DOES NOT MATCH, IT'S CERTAINLY THE WRONG PART 120V 60Hz T.85 X-XX/XX/XX (this is a date code which may vary by each individual unit) INFORMATION ON METAL: XX/XX/XX X:XX (this is a date code which may vary by each individual unit) B 110/127 V 50/60 Hz 4W Images may be STOCK IMAGES and not of the actual item which you are purchasing, which may differ only in cosmetic wear, but is fully operational and functions as intended. Check photos and description! CHECK THE PART NUMBER AND PHOTOS CAREFULLY! You need BOTH: #1 Make certain that the PART NUMBER of the listing matches the number on your old part down to the digit. Merely matching the model number is not enough. #2 Verify the photos to make sure that all needed wires are included and intact, and that all necessarily wire terminals and plugs and sockets are available, and that the part matches visually as well. (Also verify the typed numbers in the description with the photos of the label incase of an accidental typo.) (When we list part information, we are not always certain how relative every single number on the label is, as some numbers may simply be the date of production of that particular unit. We try to designate the primary part number, but the verification of the rest of these numbers is the responsbility of the buyer.) Compatibility issues are the responsibility of the buyer. We are not responsible for the accidental purchase of a part incompatible with the machine or whatever you need it for, or if it did not fix/solve your problem, or if you decided not to use the part, or if the manufacturer or another website claimed compatibility, etc. Again, it is the responsibility of the buyer to correctly diagnose their machine. ***ALL SALES ARE FINAL*** ...under the condition that the sold unit is a functional (i.e. not defective) part (which would be covered by the 1-year warranty). Some parts may be missing wires or have some wires cut that the buyer may be required to splice together. Used parts may also be subjected to some cosmetical wear. Check the photos carefully to see what is included in each listing. ***Not all parts will work with all machines!*** 1-Year WarrantyYour product comes with a free 1-Year Warranty! This product comes with a 1-Year warranty. The warranty ensures coverage of the functionality of the part only. It does not include coverage of cosmetic damage of any kind or the function of any attached accessories to the part such as wires, etc. **Please note: 1-Year Warranty does not cover any of the following situations (but is not limited to): the buyer altering or tampering with the product in any way other than what is necessary for installation, or for damaging the product by failure to correct the original problem which caused the old part to fail, or failing to provide information to follow warranty steps, or failing to return items when problems arise, or misleading the seller/withholding payment/abusing the transaction in any way. The warranty also does not cover any situations related to the buyer purchasing the incorrect part to fix his machine, a buyer changing his mind after the shipment of the part or deciding to purchase another machine instead, or the part not being able to be used in the expected way, or any other compatibility issues. It is the buyer's responsibility to correctly diagnose his problem. This is to ensure and promote correct usage of the product. If our part fails within 1 year, either a replacement part will be sent, or a refund will be given. (Our choice.) If the part fails within 3 months of purchase, shipping costs for returning the part will be paid by the seller. If the part fails after 3 months but within 1 year, the return shipping of the old part may be required by the buyer. In such case, the shipping for the replacement part to the buyer will be paid by the seller. Condition Description Used: All parts may have been previously used, and therefore may show signs of cosmetic wear. Some used parts may be missing a necessary wire for installation, or may have cut wires requiring splicing. We do our best to provide accurate information and photos regarding the condition of each product, but we may miss small details. Therefore please look closely at the photos before buying. New other (see details): This item was taken from a brand new machine and was never used or tampered with. It is not in the original packaging, so there may be signs of cosmetic wear. We do our best to provide accurate information and photos regarding the condition of each product, but we may miss small details. Therefore please look closely at the photos before buying. New: This item was brand new in the packaging. It may have been removed ONCE solely for verification and photos. **Please keep in mind that changes in lighting can affect the appearance of certain items. Scratches/dents and the like may not be noticeable in the photos but may show up once installed in your home. Please understand that we want to give you the best representation possible of any item you purchase, so feel free to ask in-depth questions about any item before buying if you are concerned about condition, and we will do our best to answer as accurately as possible! InstallationINSTALLATION & RECALIBRATION Many appliance parts, especially electronic control board parts, may store fault or error codes. Most of these errors need to be "cleared" from the appliance after the new part is installed and before the new part will work properly. Unfortunately, no appliance manufacturer has a standard recalibration process. You will need to search by your MODEL number plus the error description to try to find this process and if it is necessary for your particular machine model, or to consult the owner's manual. ONLY A SYMPTOM? Before installing the part, make sure that the part to be replaced is the ONLY issue with the machine. Some parts go bad because they are a symptom and not the actual problem. If the old part is replaced with a brand new part, it will go bad again. For example, some machines have a situation that when the pump fails it also takes out the fuse on the mother board. Therefore, if the board were to be replaced solely, the pump would blow that fuse again. Purchase of our products means that you have read, understood, and agreed to our policy. Thank you!Not sure if this is the right part?Message us your part number or take a photo of the label on the part FREE shipping on almost all parts! There is a one day handling time on most parts, and up to a 3-4 day handling time on most motors (as most motors must be physically dropped off shipped FedEx or UPS, which may happen one or two times per week). **Shipping to US territory only. **NO international orders under any conditions. Shipping We are a top-rated family-owned major appliance discount retail store located in Grand Rapids, MI. We specialize in Scratch & Dent, certified refurbished machinery, and appliance parts & accessories. About Us Reach out via eBay messagesQuestions? WASHER DISPENSER ACTUATOR - OEM - used PRINTED INFORMATION ON PLASTIC: EID RS30 7300A <----- IF THIS NUMBER DOES NOT MATCH, IT'S CERTAINLY THE WRONG PART 120V 60Hz T.85 X-XX/XX/XX (this is a date code which may vary by each individual unit) INFORMATION ON METAL: XX/XX/XX X:XX (this is a date code which may vary by each individual unit) B 110/127 V 50/60 Hz 4W Images may be STOCK IMAGES and not of the actual item which you are purchasing, which may differ only in cosmetic wear, but is fully operational and functions as intended.

Price: 16.95 USD

Location: Hersey, Michigan

End Time: 2024-07-30T22:28:21.000Z

Shipping Cost: 0 USD