Edelbrock 2703 Performer EPS Intake Manifold w/ Oil Fill Tube for SB Chevy

Description: $ImageURL1$Edelbrock 2703 Performer EPS Intake Manifold w/ Oil Fill Tube for SB ChevyPART NUMBER: 2703BRAND: EdelbrockDESCRIPTION Intake Manifold w/Oil Fill Tube CHEVROLET 262-400 SMALL-BLOCK V8 PERFORMER EPS w/ Oil Fill Tube (IDLE-5500 RPM) Non-EGR Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's tuned for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm.Dyno tests showed gains of 5 hp and 9 ft-lbs of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs of torque for more performance where you need it most.This manifold combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of Edelbrock's Classic valve covers with no breathers. Includes Oil Fill Tube (not installed) and matching push-in breather cap. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Will not fit under stock Corvette hood. Satin finish. CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (500-650 cfm) Carburetor.INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7201 (Not Included) Manifold ht: A-3.74, B-4.80 Carb pad height: 4.27 Port exit dimensions: 1.15 x 1.87 CAMSHAFT RECOMMENDATIONS: #2102, #2103, #2208, #2209 (Not Included) FOR RACING USE ONLY: This product is intended to be used on vehicles that are exclusively designated for racing use only. It is not legal for use on vehicles that are registered for street use.FOR USE ON PRE-POLLUTION CONTROLLED VEHICLES (PPCV): This product is legal for use on pre-pollution controlled vehicles. It can be used on all vehicles that were manufactured before emissions control regulations were imposed. These vehicles are considered uncontrolled vehicles.Uncontrolled vehicles are defined as...1965 and older U.S. manufactured California Certified vehicles1967 and older U.S. manufactured Federally Certified vehicles1967 and older Foreign manufactured vehiclesENGINE SWAPS: This product is intended to be used with engines that have been transplanted or swapped into an uncontrolled or pre-pollution controlled vehicle, as defined above. It is not legal for use on pollution controlled vehicles.

Price: 335.88 USD

Location: Appleton, Wisconsin

End Time: 2024-11-29T02:35:31.000Z

Shipping Cost: 0 USD