EAA BOUNTY HUNTER MAGNA-TUSK™ GRIPS ~ 2P WHITE IVORY SCROLL ENGRAVED

Description: Arizona Custom GripsEAA BOUNTY HUNTER(1873 SINGLE ACTION ARMY STYLE REVOLVERS)~ Exclusive ~ MAGNA-TUSK™WHITE IVORYSCROLL ENGRAVED GRIPSMilled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~two-PIECE (with SCREWHOLE) STYLETHIS AUCTION IS FOR OUR TWO-PIECE (SCREWHOLE) STYLE GRIPS. SEE BELOW.********ONE-PIECE VS. TWO-PIECE STYLE GRIPS:Note: Two-Piece style grips incorporate a visible screw and screwhole, allowing easy and quick removal for cleaning or maintenance of your revolver. One-Piece style grips do not use a screw but instead use an internal spacer. We sell both types. Both styles are traditional and historical designs and both were originally used on early Colts, so it is a matter of personal preference. Both styles of our grips will interchange and work on either style of grip frame, no matter how your revolver is currently set up. See below.One-Piece style grips (i.e., grips which do not have a visible screwhole in the grips) incorporate a user installed spacer (included with the grips) between the grip panels, as seen on many of the early Colts. The spacer supplied with your grips is sent unmounted to ensure optimum fit with your revolver, with simple, quick installation which takes about one minute or so per panel. Fully illustrated instructions are included. This results in a rock-tight fit, without the need of a screw. Preferred by many collectors for their clean lines and traditional look. One-Piece style grips are removed by removing the three backstrap screws, and pulling the grip and backstrap backwards. Reinstallation is in reverse order. Alternatively, our Two-Piece style grips (i.e., grips with a visible screw and screwhole) offer the superior convenience of quick grip removal. Our grips include a free Conversion Kit, allowing their use on revolvers that are currently set up for One-Piece style grips that do not have a grip pin. The Conversion Kit replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight on the frame, allowing no movement. This requires no modification to your revolver and gives you the advantage of the ease of maintenance of Two-Piece grips, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were also used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many collectors.Fully illustrated, detailed instructions are included with each set of grips. 06302300~~~~~ What these will fit:This auction is for a set of Genuine Magna-Tusk™ grips for the EAA BOUNTY HUNTER (Model 1873 SAA style revolvers). The EAA Bounty Hunter, made by Weihrauch of Germany and imported by European American Arms in Florida, incorporates a transfer bar safety and a slightly larger frame than the Colt SAA, capable of handling the .44 Magnum. A Brief History of the EAA Bounty Hunter: The Bounty Hunter owes its lineage to the well known Hawes Western Marshall revolvers, made by the J.P. Sauer & Sohn firm in Germany from the late 1960’s and into the 1970’s. J.P. Sauer later acquired the Swiss gunmaker SIG, changing the company name to Sig Sauer. At that time, Sauer began focusing on autoloaders and sold its revolver operation and tooling to Herman Weihrauch Waffenfabrik, also of Germany. Weihrauch added a transfer bar safety and continued production of the revolver as the Bounty Hunter. What these will NOT fit: Please note that these grips are made to fit ONLY the EAA BOUNTY HUNTER Single Action revolvers. These will NOT fit any revolvers from other makers (such as Uberti, Pietta, Armi San Marco, Colt, Ruger, etc.). Please drop us an email if you have any questions, we are always happy to help. For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 04102300 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory Grips: Our Ivory grips, an exclusive of Arizona Custom Grips, are made out of a premium high-grade, ultra-high density ivory material (Magna-Tusk™), designed from the ground up as a premium grip material to greatly improve on the inherent fragility and weakness of the cheaper Bonded Ivory used on just about all factory and regular aftermarket ivory grips today. Standard Bonded Ivory is brittle, and tends to weaken and develop stress fractures over time with repeated use, firing, and handling. Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative Ivory grip material available today, while still retaining the pristine look of real ivory. These grips are not cast or made out of an inferior, lightweight material, but are heavy and dense, carefully milled out of a solid block, one at a time. Magna-Tusk is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, will not melt like Urethane or plastic, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is produced with outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which most experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us. Full money back, less shipping, if not fully satisfied!

Price: 94.95 USD

Location: Mesa, Arizona

End Time: 2024-09-16T01:55:22.000Z

Shipping Cost: 5.99 USD