Dinan D760-0051 Carbon Fiber Air Intake BMW MINI Transverse B46/B48

Description: Dinan Part Number D760-0051 Fits applications below. 2014-2019 Mini Cooper S Hatchback 5-Door2014-2019 Mini Cooper S Hatchback 3-Door2015-2019 Mini Cooper S Convertible2016-2019 Mini Countryman S Hatchback2015-2019 Mini Clubman JCW Hatchback2016-2019 BMW X1 xDrive28i 2015-2019 Mini Cooper JCW Convertible2016-2019 Mini Countryman JCW Hatchback2015-2019 Mini Clubman S Hatchback2016-2019 BMW X1 sDrive28i 2014-2019 Mini Cooper JCW Hatchback 5-Door2014-2019 Mini Cooper JCW Hatchback 3-Door2018-2020 BMW X2 xDrive28i 2018-2020 BMW X2 sDrive28i The Dinan carbon fiber intake for the MINI B46/B48 engines (as well as the BMW F48 X1 and F39 X2) is tantamount to an exercise in efficiency. Given a confined space with limited options and an even smaller budget– create an intake that provides power, sound, and throttle response in an aesthetically pleasing package. While not the easiest of things to accomplish, we embarked upon the task with our team of engineers determined to provide a solution. Through a bevy of flow bench testing it was quickly determined that the biggest hindrance to improved flow on the stock intake was the factory snorkel. Unfortunately, the snorkel also was the piece that would cause the largest increase in cost to a potential kit. As a result it was quickly abandoned as a potential area of improvement. Instead, attention was turned to finding a way to introduce a secondary inlet for additional air flow. With limited room to work with, traditional secondary ducting was not possible. This in turn led to multiple experiments being conducted on the effectiveness of a possible open air inlet on the upper lid. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open air intake systems where lots of overheated engine bay air is utilized in the intake tract. The results of these tests showed that a 12 sq./in. opening for additional air on the opposite side of the upper lid from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved and additional power is realized in the form of max gains of +5 HP / +5 ft-lbs of torque. The secondary air inlet also allows the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the system is made of immaculate carbon fiber so it looks the role as well. The end result of an optimized lid, an improved filter and thorough testing, yields an incredibly efficient and cost effective solution that you will be hard pressed to beat. Benefits of the Dinan Carbon Fiber High Flow Air Intake for the MINI F54 Clubman S/JCW F55/F56/F57 Cooper S/JCW F60 Countryman S/JCW and BMW F48 X1 F39 X2 (B46/B48 engines): + More Power: +5 HP & +5 lb-ft of torque at 5000 RPM + Enjoyably louder, sportier sound + Improved throttle response + Large carbon fiber air box lid allows increased volume of air to be utilized taking advantage of the free flowing filter + Bell-mouthed side inlet creates a secondary air intake source with optimal flow characteristics and no increase in intake air temperature + Free flowing injection molded Air Mass Meter housing + Quick and easy installation Please contact before ordering if you are not 100% sure of fitment Emission Status49 State Emissions Legal. This product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is legal in California only for racing vehicles, which may never be used upon a highway.Max HP Gain5 @ 5000 RPMMax Torque Gain5 @ 5000 RPMIncluded NotesAir Filter (D401-0022), Carbon Airbox Lid, MAF Housing and Hardware Kit.

Price: 369.95 USD

Location: Bowling Green, Kentucky

End Time: 2024-10-13T15:47:22.000Z

Shipping Cost: N/A USD