Dillon RL550 XL650 XL750 Casefeed Lubricate Adapter for Calibers .308 6.5CM .45

Description: Hello, fellow reloader! This case lubrication adapter is a direct replacement for a .308 caliber kit case feeder tube connector on Dillon 750/650 presses. Adapter was recently reworked and improved for handgun caliber .45 - added a removable insert to block the pistol brass from falling out - it can be removed to process taller rifle brass. Design of wheels was improved to use less oil. I designed it to solve a stuck cases problem once and for all, after dealing with that issue multiple times either due to defects on older cases or insufficient amount of lube spray applied prior to resizing/depriming cycle. With this adapter in place the issue is guaranteed not to happen again. I included short video demonstrating the steps of setting it up, it is self-explanatory. Install adapter and rubber band to make sure both wheels are pressed in - use rubber band in that position while resizing brass, for other operations rest it on the tube freely so wheels would not be pressed in and rub at cases transferring lubricant. Add lubricant of your choice - do not add too much, just enough for wheels to touch it. Adapter pockets are made to be large enough to supply oil to about of 100 cases in average. Less is more, do not overfill. Rubber band does not require too much tension - refer to the picture of how it is suggested to setup, with one string of the band used only. It may differ upon the type and size of the rubber band, of course. Offered in either Black or Blue color. Feel free to contact me with any questions you may have. No returns, USPS shipment to continental USA only.

Price: 29.99 USD

Location: Natick, Massachusetts

End Time: 2024-01-09T01:30:51.000Z

Shipping Cost: N/A USD