Dart Pusher / Feed Bar (PETG) for Dart Zone Pro Mk-III / Mk-3

Description: This replacement dart pusher / feed bar fixes the issue with the Dart Zone Pro MK-III not feeding darts from Worker magazines properly. With the stock feed bar, it sometimes jams with half-lengths from Worker magazines and often it will double-feed with full-length from any magazine. Includes: 1x Dart Zone Pro MK-III Dart Pusher / Feed Bar Attribution: Designed by haphazardlynamed (https://www.thingiverse.com/haphazardlynamed). Installation: Fairly easy. Disassemble the blaster and remove the stock pusher. Put this one in its place after making sure there are no burrs on the pusher and preferably after apply a small amount of lube. Re-assemble the blaster and youre good to go with Worker mags! Notes about material: This product is printed in PETG material which offers superior thermal resistance and increased durability compared to PLA products. PETG has a higher glass transition temperature of 80°C whereas PLA is 60-65°C. For PLA, this is within range of the temperatures that often occur inside a vehicle during summertime so items made from PLA may end up warping in those situations. The same issue can possibly occur from exposure to direct sunlight if the temperature is high enough. PETG has a much higher glass transition temperature however so you are very unlikely to ever experience issues with it warping in addition to it just being stronger in general. PETG products do come at a higher cost than the same product in PLA because PETG takes longer to print and also requires more time to clean up after printing but the result is a very high-quality product. Disclaimer: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts alone or a combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have visual imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength. Powered by ExportYourStore.com

Price: 5.34 USD

Location: Huntsville, Alabama

End Time: 2024-12-01T01:15:46.000Z

Shipping Cost: N/A USD