COLT COWBOY MAGNA-TUSK™ GRIPS ~ AGED IVORY, SCROLLWORK ENGRAVED

Description: Arizona Custom GripsColt Cowboy~ Exclusive ~ MAGNA-TUSK™Aged ivory, Scrollwork engraved GRIPSMilled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~~~two-PIECE (with SCREWHOLE) STYLEOne-Piece vs. Two-Piece Grips: Many people prefer the clean lines of a grip without a screwhole (One-Piece), while others prefer the look and convenience of a Two-Piece grip (with a screw), which is easier to remove for cleaning or maintenance. Both styles were originally made by Colt in the 1800’s, and both are historically correct. Whichever style you choose really depends on the look you are after. We manufacture both styles.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.Note: if your revolver is currently set up for One-Piece grips (i.e., no grip pin), we will include, free of charge upon request, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame without any modification to your frame. Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. If your revolver does NOT have a grip pin, please send us an immediate email after the purchase requesting the conversion kit. If your revolver already uses two-piece grips and has a grip pin, you do not need the kit and these grips will work, AS-IS.Grip screw, and full illustrated instructions are included with each set of grips. Whichever style you choose, you are guaranteed to get the best quality grips on the market, made to last a lifetime, for your shooting pleasure and enjoyment.10292000 ~~~~~~~WHAT THESE WILL FIT (Please read this through in its entirety): Colt Cowboy Brand New, unused Magna-Tusk™ grips for the Colt Cowboy revolvers. The Colt Cowboy was produced by Colt from 1998 to 2003. Aimed toward the Cowboy Action Shooting market, the Cowboy incorporated an investment cast receiver, transfer bar safety, and enhanced lockwork meant to compete with revolvers such as the Ruger Vaquero, while retaining the fine balance and handling of the classic Single Action Army. Many consider the Cowboy’s mechanical build quality to be superior and more robust than the SAA, and better suited for the rigors imposed upon it in the competitive shooting sports. Since being discontinued, the Cowboy has since garnered somewhat of a collectible status in the market among Colt collectors and shooters alike. Please note that these grips will NOT properly fit the 1st, 2nd or 3rd Generation Colt SAA models. Also, these will NOT fit any revolvers of any different maker, including the Uberti, Pietta, or any other Italian or non-Italian clones. If you have one of these, please see our store categories for the proper grips, or drop us an email and we will be happy to help. 23121204 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory Grips: Our Ivory grips, an exclusive of Arizona Custom Grips, are made out of a premium high-grade, ultra-high density ivory material (Magna-Tusk™), designed from the ground up as a premium grip material to greatly improve on the inherent fragility and weakness of the cheaper Bonded Ivory used on just about all factory and regular aftermarket ivory grips today. Standard Bonded Ivory is brittle, and tends to weaken and develop stress fractures over time with repeated use, firing, and handling. Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative Ivory grip material available today, while still retaining the pristine look of real ivory. These grips are not cast or made out of an inferior, lightweight material, but are heavy and dense, carefully milled out of a solid block, one at a time. Magna-Tusk is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, will not melt like Urethane or plastic, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is produced with outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which most experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. About Our Aging Process: We go to great efforts to ensure that our Aged Ivory not only looks similar to real aged ivory, but in fact looks identical to the real thing. Our Magna-Tusk blanks will produce an aged Ivory grip unlike any other material made today. Through our slow aging process, these grips become beautifully mottled, variegated, and weathered just like old, antique Ivory, and incorporate other authentic details found on original old Ivory as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West. As with real aged Ivory, no two are exactly the same. Our process produces an authentic appearance and genuine patina which extends deep into the surface. Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating. With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original. While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person. Many of our repeat sales are made by the very customers we sell to, who take their grips to the range or club, where our grips are immediately seen and noticed by others. We are also capable of producing them with a “clean” aged look if required (i.e., without the mottling, etc.), which is a simpler process, although most would agree that they do not look quite as authentic as our regular aged grips. If you are interested in ordering grips for a Brace of pistols, please order both sets together, so we can ensure a good matchup. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 040720 Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – Full money back, less shipping, if not completely satisfied!!

Price: 89.95 USD

Location: Mesa, Arizona

End Time: 2024-02-02T18:09:56.000Z

Shipping Cost: 5.99 USD