Cisco WS-C3850-48P-L V04 48-Port PoE+ L3 Switch C3850-NM-2-10G Module 2*715W PSU

Description: TESTING & COSMETIC NOTES: This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING The unit has been reset to the factory default settings. See console log below. Please note notched power cable is NOT included. COMPONENTS INCLUDED IN THIS AUCTION: • (1) - CISCO WS-C3850-48P-L V04 48-PORT POE+ L3 SWITCH • (2) - CISCO PWR-C1-715WAC POWER SUPPLY • (1) - CISCO C3850-NM-2-10G MODULEREPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.ADDITIONAL INFORMATION: Booting...Interface GE 0 link down***ERROR: PHY link is downThe "IP_ADDR" environment variable is not set.Getting rest of imageReading full image into memory...Check base package header ...: done = 16384Getting rest of imageReading full image into memory....doneReading full base package into memory...: done = 32795564Bundle Image--------------------------------------Kernel Address : 0x537783c4Kernel Size : 0x4381df/4424159Initramfs Address : 0x53bb05a3Initramfs Size : 0x1ab5e09/28007945Compression Format: mzipBootable image at @ ram:0x537783c4Bootable image segment 0 address range [0x81100000, 0x81da5280] is in range [0x80180000, 0x90000000].@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 623Loading Linux kernel with entry point 0x81895bf0 ...Bootloader: Done loading app on core_mask: 0xf### Launching Linux Kernel (flags = 0x5)Linux version 4.9.187 (sumikum7@sjc-ads-5670) (gcc version 5.3.0 (GCC) ) #1 SMP Fri Nov 19 03:09:46 PST 2021CVMSEG size: 2 cache lines (256 bytes)Cavium Inc. SDK-5.1.0bootconsole [early0] enabledCPU0 revision is: 000d900a (Cavium Octeon II)Checking for the multiply/shift bug... no.Checking for the daddiu bug... no.%IOSXEBOOT-3748f25d3076de52df7db2641f93e50c-new_cksum: (rp/0): 4%IOSXEBOOT-3748f25d3076de52df7db2641f93e50c-saved_cksum: (rp/0): 4Final tar file: mcu_ucode_bundle_6_2_0.tarBoth links down, not waiting for other switchesSwitch number is 1 Restricted Rights LegendUse, duplication, or disclosure by the Government issubject to restrictions as set forth in subparagraph(c) of the Commercial Computer Software - RestrictedRights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Technical Data and ComputerSoftware clause at DFARS sec. 252.227-7013. Cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.12.7, RELEASE SOFTWARE (fc2)Technical Support: http:/www.cisco.com/techsupportCopyright (c) 1986-2022 by Cisco Systems, Inc.Compiled Wed 02-Feb-22 07:28 by mcpreThis software version supports only Smart Licensing as the software licensing mechanism.PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE ORLICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE,AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE"SOFTWARE"), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULLACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOUARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.Your use of the Software is subject to the Cisco End User License Agreement(EULA) and any relevant supplemental terms (SEULA) found athttp:/www.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html.You hereby acknowledge and agree that certain Software and/or features arelicensed for a particular term, that the license to such Software and/orfeatures is valid only for the applicable term and that such Software and/orfeatures may be shut down or otherwise terminated by Cisco after expirationof the applicable license term (e.g., 90-day trial period). Cisco reservesthe right to terminate any such Software feature electronically or by anyother means available. While Cisco may provide alerts, it is your soleresponsibility to monitor your usage of any such term Software feature toensure that your systems and networks are prepared for a shutdown of theSoftware feature.FIPS: Flash Key Check : BeginFIPS: Flash Key Check : End, Not Found, FIPS Mode Not EnabledAll TCP AO KDF Tests Passcisco WS-C3850-48P (MIPS) processor (revision S0) with 794816K/6147K bytes of memory.Processor board ID FOC1852X0HK2048K bytes of non-volatile configuration memory.4194304K bytes of physical memory.250456K bytes of Crash Files at crashinfo:.1609272K bytes of Flash at flash:.0K bytes of WebUI ODM Files at webui:.Base Ethernet MAC Address : c4:72:95:e5:49:80Motherboard Assembly Number : 73-14442-10Motherboard Serial Number : FOC18520KNYModel Revision Number : S0Motherboard Revision Number : A0Model Number : WS-C3850-48PSystem Serial Number : FOC1852X0HKPress RETURN to get started!*Sep 13 23:16:03.060: Rommon debug: debugFlagsStr[1], flags[0x1]*Sep 13 23:16:06.113: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed*Sep 13 23:16:09.289: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized*Sep 13 23:16:09.290: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled*Sep 13 23:16:09.294: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowedRA Tracing tool registry return: 0*Sep 13 23:16:18.006: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan*Sep 13 23:16:19.606: %LINK-3-UPDOWN: Interface Lsmpi18/3, changed state to up*Sep 13 23:16:19.608: %LINK-3-UPDOWN: Interface EOBC18/1, changed state to up*Sep 13 23:16:19.610: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down*Sep 13 23:16:19.610: %LINK-3-UPDOWN: Interface LIIN18/2, changed state to up*Sep 13 23:16:19.891: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 1: EMP_RELAY: Cha nnel UP!*Sep 13 23:15:42.873: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is nocable*Sep 13 23:15:42.873: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is down*Sep 13 23:15:42.873: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is nocable*Sep 13 23:15:42.874: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the s tack.*Sep 13 23:15:47.465: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the s tack.*Sep 13 23:15:49.468: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the s tack.*Sep 13 23:15:49.469: %STACKMGR-6-ACTIVE_ELECTED: Switch 1 R0/0: stack_mgr: Switch 1 has been elected ACTI VE.*Sep 13 23:16:19.914: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp activ e switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP*Sep 13 23:16:19.923: %SMART_LIC-6-HA_ROLE_CHANGED: Smart Agent HA role changed to Active.*Sep 13 23:16:20.631: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi18/3, changed state to up*Sep 13 23:16:20.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC18/1, changed state to up*Sep 13 23:16:20.640: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down*Sep 13 23:16:20.641: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN18/2, changed state to up*Sep 13 23:16:22.522: %SYS-5-CONFIG_P: Configured programmatically by process MGMT VRF Process from consol e as vty0*Sep 13 23:16:22.546: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-vrf created with ID 1, ipv 4 table-id 0x1, ipv6 table-id 0x1E000001*Sep 13 23:16:22.548: %SYS-5-CONFIG_P: Configured programmatically by process MGMT VRF Process from consol e as vty0*Sep 13 23:16:23.258: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down*Sep 13 23:16:24.933: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.*Sep 13 23:16:25.467: %SYS-5-CONFIG_P: Configured programmatically by process CPP MQC QoS Policy manager f rom console as vty1*Sep 13 23:16:26.399: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default*Sep 13 23:16:27.228: %SYS-5-RESTART: System restarted --Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.12.7, RE LEASE SOFTWARE (fc2)Technical Support: http:/www.cisco.com/techsupportCopyright (c) 1986-2022 by Cisco Systems, Inc.Compiled Wed 02-Feb-22 07:28 by mcpre*Sep 13 23:16:27.501: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Sep 13 23:16:27.501: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Sep 13 23:16:27.501: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Sep 13 23:16:27.501: %EVENT_TRACE-6-ENABLE: Trace already enabled.*Sep 13 23:16:28.568: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/1, changed state to down*Sep 13 23:16:28.571: %LINK-3-UPDOWN: Interface GigabSwitch>itEthernet1/1/2, changed state to down*Sep 13 23:16:28.571: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/3, changed state to down*Sep 13 23:16:28.575: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/4, changed state to down*Sep 13 23:16:28.578: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to down*Sep 13 23:16:28.579: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/2, changed state to down*Sep 13 23:16:28.581: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/3, changed state to down*Sep 13 23:16:28.583: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/4, changed state to down*Sep 13 23:16:29.219: %LINK-3-UPDOWN: Interface Vlan1, changed state to up*Sep 13 23:16:29.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/1, changed state to down*Sep 13 23:16:29.572: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/2, changed state to down*Sep 13 23:16:29.572: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/3, changed state to down*Sep 13 23:16:29.577: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/4, changed state to down*Sep 13 23:16:29.578: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/1, changed sta te to down*Sep 13 23:16:29.580: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/2, changed sta te to down*Sep 13 23:16:29.581: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/3, changed sta te to down*Sep 13 23:16:29.583: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/4, changed sta te to down*Sep 13 23:16:32.565: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp activ e switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP*Sep 13 23:16:32.783: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Startup Config Present)*Sep 13 23:16:35.515: %SYS-5-CONFIG_P: Configured programmatically by process EPM CREATE DEFAULT CWA URL A CL from console as console*Sep 13 23:16:38.263: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an author itative time source, like NTP, can be obtained.*Sep 13 23:16:38.293: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI_LEGACY created succesfully*Sep 13 23:16:38.338: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI_LEGACY has been generat ed or imported by pki-sudi*Sep 13 23:16:38.440: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI_LEGACY0 created succesfully*Sep 13 23:16:38.455: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI created succesfully*Sep 13 23:16:38.493: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or i mported by pki-sudi*Sep 13 23:16:38.704: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI0 created succesfully*Sep 13 23:16:38.714: %IOSXE_INFRA-6-PROCPATH_CLIENT_HOG: IOS shim client 'pkissl reader mqipc' has taken 259 msec (runtime: 255 msec) to process a 'unknown' message*Sep 13 23:16:50.603: %PLATFORM_PM-6-FRULINK_INSERTED: 2x1G 2x10G uplink module inserted in the switch 1 s lot 1*Sep 13 23:17:23.293: %WSMAN-3-INVALID_TRUSTPOINT: Trustpoint associated with HTTP is either invalid or do es not existSwitch> Please Click Here to Visit Our Store at "> at " src="https://www.ocdepot.com/template/Rounded_Middle_Right.gif" /> at " src="https://www.ocdepot.com/template/Rounded_Left_Bottom.gif" /> at "> at " src="https://www.ocdepot.com/template/Rounded_Middle_Bottom.gif" /> at " src="https://www.ocdepot.com/template/Rounded_Right_Bottom.gif" /> SearchBy37 - 263584 | Loc: Z206 | L: Mitchell | T: | PM: Nick | QTY: 0 | Plan: L FREESHIP - 20LBS | 22.00"x20.00"x5.00" 27.00lbs | Start: $0.00 | BIN: $119.99 | | 2024-09-16 | | 51268

Price: 119.99 USD

Location: Garden Grove, California

End Time: 2024-10-16T20:12:27.000Z

Shipping Cost: 0 USD