Car EVAP Smoke Machine Automotive Pipe Leak Diagnostic Detector Tester Analyzer

Description: AWSDT106 How to do leakage test? 1.Fill 10ml - 20ml test oil to the detector. 2.Disconnect the pipe that needs to be connected with detector. 3.Connect detector with DC12V battery, device starts to work. 4.The pipe will be filled with smoke.Check the leak points. Wide range of applications Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault. Built-in air pump Don’t need to connect an external air pump, ready for diagnosis and maintenance at any time! Fast smoke output This machine built-in air compressor, with superior wick and heating element. It can produce smoke instantly by heating up USP mineral oil or baby oil. 4ft Smoke Outlet Pipe can help reach and connect perfectly. Overheat & anti-frost protection This smoke detector is equipped with the latest intelligent protection device. When the temperature of the device exceeds 75 degrees Celsius, the power protection device will be intelligently activated to turn it off, to ensure the safety of the operator and the device. The device is also suitable for low temperature operation. What's in the package? 1pc * AUTOOL SDT106 Main Unit 1pc * Hook (with hand-tighten nuts) 1pc * Standard Rubber and Cone Adapter 1sets * Hard Rubber Hose Plug 1pc * Power Cord Clamp 1pc * Valve Core Wrench 1pc * Test Oil Refill Bottle(oil not included) 1pc * EVAP Special Connector 1pc * Smoke Hose and User Manual AWSDT205 Large Amount of Smoke It has its own air pump, so it does not have to rely on other air machines.Connect the detector with DC12V battery,it can output losts of smoke within 30 seconds after turning on. Specifications Power Supply: DC12V±2 Output Pressure: 15psi Output Smoke Value: 1-6L/min Ambient Temperature: -10℃ ~ + 40℃ Relative Humidity: ＜85% Test Oil: Mineral oil or baby oil Air Pressure Output: Built-in air pump Dual modes: Smoke mode & air mode Multi Protections: Oil outlet, over-heat and over-load protection Package List 1* Car Smoke Leak Detector Main Unit 1* Power Cord Clamp 1* Smoke hose 1* Standard Cone adapter 1* Hard rubber kits 1* 30ml Test oil refill bottle 1* Valve Cord wrench 1* Universal airbag adapter 1* EVAP special connector 1* User manual Overheat & Anti-frost Protection This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device. Safety This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device. Wide Range of Applications For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car model Expandable Bladder Main unit structure This is AUTOOL's only official Store A.Pressure Relief Valve B.Hand Pump C.Rubber Component D.Tube Opening This is an improved version of the attachment, with a steel ring removed at the end so that it can use a smaller pipe interface. How to work 1.Clean the inner wall of the intake opening while the Air Filter, and the Throttle connections are removed, so as not to scratch the adapter. 2.Close the Pressure Relief Valve(E) next to the Hand Pump(G). 3.Put the Rubber Component(F) into the intake opening. 4.Inflate the Rubber Component(F) by pressing the Hand Pump(G) till the intake opening is tightly sealed. 5.Now the system is ready to test, introduce air/smoke into the system by plug the smoke nozzle into the Tube Opening(H). 6.After test, pull off the smoke nozzle, release the inflated air by open the Pressure Relief Valve(E) next to the Hand Pump(G). 7.Clean the adapter for storage, avoid contact with corrosive liquids. Quick intake adaptor Quick intake adaptor is an inflatable block off bladder with a pressurized vapor pass-through that allows technicians to test an entire intake or exhaust systems quickly and easily. Universal intake adaptor Universal intake adaptor can be used with any brand of smoke machine or diagnostic leak detector to reduce workload on a leak check.Please make sure the diameter of intake/exhaust is bigger than 2" Block off bladder conforms to any Block off bladder conforms to any shape of intake / exhaust: Round, oval, square, rectangular and even severely angled and hard to reach intake / exhaust systems, while allowing vapor to pass through for fast diagnostics. Compatible with any diagnostic leak detectors Compatible with any diagnostic leak detectors, It fits 100% of automobiles, from passenger car to heavy-duty trucks, to quickly leak test the integrity of the entire induction system with one simple procedure.

Price: 24.99 USD

Location: Bordentown, New Jersey

End Time: 2024-08-05T03:31:58.000Z

Shipping Cost: 0 USD