Basic Kit — Complete Fiberglass Restorer for Boats and RVs and More. Everythi...

Description: Do you have old, oxidized fiberglass or gelcoat surface. Maybe on a boat or RV. There is a proven concept, for over 25 years, in restoring old fiberglass.... It is not a wax, so it won't yellow or flake off. Instead, it is a polish made of a water-based polymer with urethane fortification, to improve its longevity. Our boats and RVs are always out in the sun-so we inject with numerous UV inhibitors to protect the finish from sun damage. By doing so allows it to last for a year or longer. The process of applying is simple. First, the surface must be completely cleaned with Poli Prep. Poli Prep removes wax, light stains and oxidation. It is a concentrate that must be dilluted 3 to 1 with water. Once diluted, put the Poli Prep mixture into a trigger sprayer and spray directly on the surface while using the scrub pad to clean until the area is dull and uniform in color. It should be completely dry before applying . Squirt a little on to the microfiber mitt and simply wipe on. Wipe on in one direction, working in small areas, about 4-6 foot sections are great. You MUST apply between 4 and 6 coats (does not work with less than four coats). Allow the product to dry in between coats, which is only about 1-2 minutes. You may go right over your vinyl decals and graphics as well as metals. cannot be used on aluminum but can go right over painted aluminum. Our kit is enough to do about a 30-34 foot boat or RV. It will last over a year and then it must be reapplied. It is not a one time application but must should be reapplied once every 12 months. THE KIT INCLUDES: 1 32 ounce bottle of Poli Prep 1 32 ounce bottle of 1 Microfiber Mitt Applicator 1 Scrub Pad with a Handle 1 Pair of gloves is a PROVEN CONCEPT in boat polish and is 'NOT' a boat wax. It is easily applied. It wipes on without the need for rubbing or buffing. It will not wash off with soap and water. Lasting over 12 months, in the Florida sun! This complete Boat Polish kit includes enough products for up to a 28' boat or RV, depending on the condition of the fiberglass.. will work on the following: RV's, boats, canoes, motorhomes, painted fiberglass, painted metals, rubber and vinyl lettering A MINIMUM OF 6 coats MUST BE APPLIED THE KIT INCLUDES: One 32-ounce bottle of Poli Prep, One 32-ounce bottle of , 1 microfiber Mitt Applicator, 1 white scrub pad with handle, and 1 pair of gloves

Price: 183.48 USD

Location: Brentwood, New York

End Time: 2024-11-15T20:55:30.000Z

Shipping Cost: 0 USD