Banda Elite 2000.4 1ohm 4 Channel 2000watts

Description: ELITE 2000.4 With a powerful 2000 Watts RMS in 4 channels and impedance of 1Ohm per channel, the amplifiers of the new ELITE line are very versatile, allowing different types of installation with a single amplifier. Thanks to its FULL-RANGE frequency response range, the ELITE fits into any project with: Subwoofers, Woofers, Low-Mid, Horns or Super Tweeters. Versatility is another strong point, being possible to make connections in 4, 3 or 2 channels, when used in Bridge connections. With the ELITE 4000.4 it is possible to connect a complete medium-sized sound system, enjoying the audio quality already established by BAND AUDIOPARTS and a low consumption. Technical specifications Maximum Power 14.4v @ 1 Ohms: 4 x 600 WRMS Maximum Power 14.4v @ 2 Ohms: 4 x 400 WRMS Max Power 14.4v Bridge @ 2 Ohms: 2 x 1250 WRMS Maximum Power 12.6v @ 1 Ohms: 4 x 500 WRMS Maximum Power 12.6v @ 2 Ohms: 4 x 300 WRMS Max Power 12.6v Bridge @ 2 Ohms: 2 x 1000 WRMS Efficiency @ 2 Ohms: 86% Efficiency @ 1 Ohms: 80% Input Voltage: 9 - 15V Input Impedance: 100K Ohms Output Impedance: 1Ohm THD+N: <1% Input Sensitivity: 220mV – 4V Signal to Noise Ratio: 80dB Frequency Response: 5 to 22kHz (-3dBs) HPF (Subsonic): 20 to 90Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover): 90 to 20kHz @ 12dB/octave Linkwitz-Riley Recommended Fuse: 100 A Standby Current: 1 A Maximum Current (sinusoidal signal): 210 A Maximum Current (musical signal): 100 A Power Cables (recommended min.): 21mm / 4 AWG Output Cables (recommended min.): 2 x 2.5mm / 2 x 13 AWG Weight (Kg): 3.3 Height (mm): 54 Width (mm): 209 Depth (mm): 243 Attention: According to Federal Law nº 11.291, prolonged exposure to noise greater than 85 dB can cause damage to the auditory system. NOTE: The installation of Banda Audioparts Amplifiers must always be carried out by a qualified professional.

Price: 319.99 USD

Location: Sao Paulo

End Time: 2024-08-17T19:59:38.000Z

Shipping Cost: 0 USD