Description: The remote control lawn mower is a remote control intelligent agricultural and forestry equipment, suitable for forestry, grassland, roads, dams, agriculture, forestry, orchards, vegetables, greenhouses, farms, ecological gardens, etc. Can trim all kinds of weeds and reeds Scope of application: orchard, garden lawn, wasteland weeds Machine size: 900mm×800mm×500mm (length×width×height) Whole machine quality: 130KG Cutting width: 540mm Adjustable height: 1-150mm Cutting height: 1-1500mm Cutting diameter: 1-50mm Supporting power: Dajiang 7.5 horsepower gasoline engine Walking speed: 0—5KM/h Working slope: 0-30° Ground clearance: 150mm Operation mode: remote control walking, cutter head lifting 1 Preparation before starting the remote control lawn mower (1) Be sure to confirm the tightness of the screws of each component before starting the work. (2) First turn the key to the right to turn on, and then push up to turn on the switch on the remote control. (3) After the remote control is turned on, there will be a beep, indicating that the machine and the remote control match normally before it can work. (4) When turning off the machine, be sure to turn off the device first, and then turn off the remote control, otherwise the machine will be out of order. Description of the remote control: D/R switch (large and small rudder): adjust the walking speed of the machine (the factory default is high gear) The left joystick controls the machine to move forward, backward, left and right. 5 channels (two-stage switch): the cutter head is raised and lowered, and the cutting height of the cutter head is adjusted. Rudder fine-tuning (left-right adjustment): When adjusting the walking speed of the machine, the ESC inside the machine will make a "drip" sound. At this time, you can use the "rudder fine-tuning" button until the ESC inside the machine does not make a sound. Throttle fine-tuning (up and down adjustment): The same principle as the ‘rudder fine-tuning’ button. Power switch: Push up to turn on the remote control, and pull down to turn off the remote. The first and second channels on the left are mixed control switches. The 3rd, 4th, 5th and 6th channels are forward and reverse switches. The factory default is to adjust the channel direction. If you accidentally flip the channel button, you can adjust it back to the original state according to the factory default. The above is the instruction manual of the remote control crawler mower. Grassland: clearing of dead grass, setting up fire barriers; Roads: pruning green belts, side slopes, parks and other municipal greenbelts, road snow removal, etc.; Forestry: stubble shrubs, clean up combustibles under the forest, and open up fire barriers; Levees: clean up weeds and shrubs in the embankment, discover potential safety hazards in time, and avoid accidents
Price: 2999 USD
Location: zhengzhou
End Time: 2023-08-17T03:05:54.000Z
Shipping Cost: 20000 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Type: 1
Brand: Unbranded
