8 Relay DC 5V 12V IR infrared control Switch Timing Delay Self-locking Latch

Description: Product Name: DC 5V 12V 8ch Multi-function IR infrared control Switch Module Timer Delay Self-locking Inter-locking Relay Package inlcuded: 1 PCS 8 ChannelIR remote control 1 PCS8 ChannelIR RelayControl Description: Product Specifications: 1 Operating Voltage : DC 12V(5V optional) 2 Operating Current(DC 12V) : Standby current 8MA, 1 relay open 37MA, 2 relays open 66MA, 3 relays open 94MA, 4 relays open 122MA, 5 relays open 150MA, 6 relays open 178MA, 7 relays open 206MA, 8 relays open 232MA 3 Momentary Self-locking Interlock Delay Four functional modes 4 Infrared receiver: VS1838(Or compatible IC) 5 Infrared remote control: NEC coding 6 Working distance: 8-15 meters (receiver sensitivity ≥0.5mW / m2) 7 Input control pins 8 ,5V TTL level ,NPN trigger, 0.2-2 second low pulse 8 Size: 99 x 62 x 20 mm 9 Weight : 116g 10 Relay maximum load capacity: DC 1-110V/5A; AC 85-265V/6A Product Features: 8 channel Multi-function infrared controller, each channel independently triggered independent delay, do not interfere with each other. 4 kinds of Functional mode: Non-locking (Momentary );Delay(2/10/60/600/3600seconds); Self-locking (Toggle); Inter-locking (Latch), The function mode and delay time are selected by the Solder pad. Low pulse trigger(Connect to the power supply GND via the trigger button or low level control via the MCU IO port) Glossary: NO : Relay normally open contact COM : Relay common contact NC : Relay normally closed contact Relay open: COM connect NO. Relay close: COM disconnect NO. Momentary : Press the remote control button (or trigger input port), Relay open, return to Close after 0.5 second; Self-locking : Press the remote control button (or trigger input port), Relay open, Press again, port Relay close, and so on; Latched : Enter the Channel 1 Latched command, port 1 Relay open, port 2-8 Relay close. Enter the Channel 2 Latched command , port 2 Relay open, port 1/3-8 Relay close Delay : Enter the Delay command, Relay open, delay of 2/10/60/600/3600 seconds)after, Relay close; Function mode selection by shorting three pads M2 1 0 Infrared remote control Technical Parameters Transmission / coding: NEC coding IRED: Infrared Wavelength: 950nm Power supply: DC 3V Working voltage: 2.2-3.4V Working current: ≥10mA Static current: ≥1uA Transmit power: 90 mW / sr typ. Working distance: 8-15 meters (receiver sensitivity ≥0.5mW / m2) Frequency: 38 kHz Battery: CR2025(Not included) Operating temperature: +55 ~ -45 or specific specifications Storage temperature: -25 ~ +55 or specific specifications Size : 85 x 40 x 7mm Weight : 11g

Price: 12.99 USD

Location: Guangzhou

End Time: 2024-02-11T09:40:53.000Z

Shipping Cost: 2.99 USD