Description: 32 H&R Mag Shotgun Adapters for 410 Shotguns 10 Inches Long 32 H&R Mag 410 Shotgun Adapters Allow a 410 Shotgun to use 32 H&R Mag Ammo Compatible with Single as well as Double Barrel Break Action Shotguns. 32 H&R Mag Shotgun Adapters Rifle dimensions are 6 Grove Bore .300 / Grove .312 Black Oxide coating as a result provides notably better corrosion protection (for maximum corrosion protection keep a thin coat of oil on the insert) Please be aware that the 10″ 410 adapters may not work in all shotguns, depending on the bore diameter. Shotguns with tapered bores may not fit. Due to the already thin wall it is not possible to make these adapters any smaller. What is a tapered bore? A tapered bore is exactly what the title implies. The diameter of the bore gradually tapers down from breech to muzzle. The amount of the taper is slight — perhaps one-thousandth to as much as two-thousandths of an inch; but at the time this service was performed, the measuring tools needed to accurately measure it weren’t commonly available. So, most of the makers didn’t actually know how much they were tapering their bores — just the fact that they were. Please note: Due to the required thin wall thickness we are not able to have O-rings on these adapters as we normally do. If you have issues with accuracy we recommend using some Teflon (plumbers tape) to achieve a snug fit on the muzzle end.
Price: 94.34 USD
Location: Toccoa, Georgia
End Time: 2024-09-27T11:45:25.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Chaszel
Model: 410
MPN: 23241032m10b
Country/Region of Manufacture: United States
Modified Item: No