Description: 2006-2008 2009 2010 2011 2012 2013 Suzuki Grand Vitara Spoiler Roof Wing PRIMER FACTORY STYLE ROOF SPOILER For: 2006-2013 Suzuki Grand Vitara INSTALLER NOTES: 1) Position Spoiler on top of Rear Hatch desired position. Use our ebay listing picture for correct spoiler placement. 2) Mark spoiler installation location with a sharpie/marker, 3 locations on center of spoiler holes, onto Rear Hatch 3) Carefully drill 3- 1/16" small pilot holes on top of Rear Hatch 4) Hand Tighten 3 screws provided and apply silicone to prevent leaks 5) Clean 3 small screw covers and installation area where screw covers will install with isopropyl alcohol 6) Apply double sided tape to small screw covers 7) Tape/Install 3 small screw covers onto spoiler PRODUCT DETAILS NEW INSTALL - Follow Installation Instructions supplied with your purchase REPLACEMENT INSTALL - Will NOT fit in factory holes if a spoiler was previously installed; THIS IS NOT AN OEM DEALER FACTORY REPLACEMENT PART. If a spoiler is being replaced and our part is the EXACT same shape as your old spoiler, then our part may cover the old, predrilled holes/area where previous spoiler was installed. fits US Spec models *Because of variations in handcrafting, customers should know that there may be filling, sanding, re-priming, and/or other processes not mentioned here needed prior to installing parts. This is NOT a warranty issue and MUST be addressed BEFORE final paintwork is completed. Welcome to Our Family of Thousands of Satisfied Customers FACTORY STYLE ROOF SPOILER For: 2006-2013 Suzuki Grand Vitara INSTALLER NOTES: 1) Position Spoiler on top of Rear Hatch desired position. Use our ebay listing picture for correct spoiler placement. 2) Mark spoiler installation location with a sharpie/marker, 3 locations on center of spoiler holes, onto Rear Hatch 3) Carefully drill 3- 1/16" small pilot holes on top of Rear Hatch 4) Hand Tighten 3 screws provided and apply silicone to prevent leaks 5) Clean 3 small screw covers and installation area where screw covers will install with isopropyl alcohol 6) Apply double sided tape to small screw covers 7) Tape/Install 3 small screw covers onto spoiler PRODUCT DETAILS NEW INSTALL - Follow Installation Instructions supplied with your purchase REPLACEMENT INSTALL - Will NOT fit in factory holes if a spoiler was previously installed; THIS IS NOT AN OEM DEALER FACTORY REPLACEMENT PART. If a spoiler is being replaced and our part is the EXACT same shape as your old spoiler, then our part may cover the old, predrilled holes/area where previous spoiler was installed. fits US Spec models *Because of variations in handcrafting, customers should know that there may be filling, sanding, re-priming, and/or other processes not mentioned here needed prior to installing parts. This is NOT a warranty issue and MUST be addressed BEFORE final paintwork is completed.
Price: 99.5 USD
Location: Altamonte Springs, Florida
End Time: 2024-09-12T19:23:54.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Interchange Part Number: side skirts body kit front rear bumper diffuser, Ventvisors door visors pillar posts, mirror covers door handle covers, JDM type R rear trunk wing fin, JDM rear trunk wing fin
Material: Plastic
Type: Lip
Color: Unfinished
Finish: Primed
Manufacturer Part Number: SZ6
Placement on Vehicle: Rear, Upper
Brand: Hyper Wings
Fitment Type: Performance/Custom
Manufacturer Warranty: Yes
Mounting Hardware Included: Yes
Attachment Type: Screws
