1992-1997 Lincoln Town car Complete Air Ride Suspension Kit FBSS 3/8" Valves,Bag

Description: Normal 0 false false false EN-US X-NONE X-NONE Newmatics Inc.1832 Lone Star Rd, Mansfield, TX 76063 We offer combined shipping on all orders Parts Sold For OFF Road / Show USE Only PLEASE READ THE ENTIRE LISTING AND SHIPPING TERMS BEFORE BUYING Brand New 1992 -1997 Lincoln Town car Complete FBSS 8 3/8" 12V DC analog valve setup Air Ride Suspension kit. This kit includes a Viair 444C Dual Chrome (2 Compressors) 200 PSI Max Air Compressors with 165/200 PSI Pressure Switch & heavy duty 80 AMP relay. The front bag brackets are complete bolt in type with single bellow bags on front, Rear lower axle bag brackets require welding over the axle with bolt in cups on top, rear double bellow bags. Comes with Made in USA Bags, Laser Cut welded brackets, Made in USA 5 Gallon 7 Port Slim & Skinny Steel Tank (painted inside out to prevent rust.) Note: Fittings shown in the picture are for illustration purposes only. The actual number of fittings included will be as per tank and will be a complete fittings set for this kit. *** Do not use shocks with more stroke than the bags stroke, otherwise bags will split at bottom or top due to over extension*** Bag Bracket Instructions: 5" Tall Cups on front top with all thread, with 2" cups on lower A Arm, Drill through the bottom A arm to bolt single bellow Airhouse2 Bags on front. Relocate shocks outside A arm (welding may be required) 2" Tall cups on rear top with all thread, weld axle brackets on rear bottom axle with center to top cups, bolt double convoluted bags on both upper cup & lower over the axle brackets. Bag Specifications: Front Bags are single convoluted with 5.875" Diameter, these will collapse 2" and max 8.5" high (Max height will be based on pressure in the bags). Usable stroke of 6" to 6.5". 3/8" NPT OR 1/2" NPT Rear Bags are double convoluted with 5.875" diameter, these will collapse 3.25" and Max 11" high (max height will be based on how much pressure in the bags). Usable stroke of 7" to 7.5" - 3/8" NPT OR 1/2" NPT ***Air Bag inlet Port Size 3/8" NPT OR 1/2" NPT - Air Bag Fittings will be as per Air inlet /Port Size- See Fittings details below*** Parts Included with This kit: Viair 444C 200 PSI Max. Chrome Dual Pack 80 AMP Relay with 165/200 PSI Pressure SwitchFront & Rear Air Bags - 3/8" NPT OR 1/2" NPT Single PortFront & Rear Bag Brackets Front Shock Relocation Kit8 3/8" ASCO NPT 12V DC 230 PSI Max Valves 5 Gallon Slim & Skinny Aluminum Air Tank - 32" L X 7.0" DIA X 8.50" H With 6 3/8" NPT Ports & 1 1/4" Drain Port - Black Powder Coated - Matt Finish3 Gauges - 2 Dual Needle & 1 Single Needle - White Face OR Black Face **Depending upon availability**Hand Held 7 Switch Box - Full FBSS **Black OR Clear **Depending upon availability**60 FT 3/8" OD DOT Approved Airline - For Valves, Bags, Tank60 FT 1/4" OD DOT Approved Airline - For GaugesAll Fittings Required For Install - See details belowAir Install Kit (wires, nuts,bolts, washers, fuses, fuse holder, Teflon Tape etc.) Fittings : (2) 3/8" MNPT X 3/8" FNPT Street Elbows(2) 3/8" MNPT X 1/4" FNPT Reducer Bushings (2) 3/8" MNPT X 1/8" FNPT Reducer Bushings(4) 3/8" Pipe Street Tee Fittings, with 1/8" Drilled & Tapped Hole -For Gauge Fittings(2) 3/8" Pipe Street Tees - No Gauge Hole(6) 3/8" MNPT Heavy Duty Hex Nipples(8) 3/8" PTC X 3/8" NPT 90 Degree Swivel Elbows (4) 3/8" PTC X 1/2" NPT 90 Degree Swivel Elbows - For 1/2" NPT Bags *** OR (4) 3/8" PTC X 3/8" NPT 90 Degree Swivel Elbows - For 3/8" NPT Bags***(5) 1/4" PTC X 1/8" NPT 90 Degree Swivel Elbows (5) 1/4" PTC X 1/8" Female Fittings - For Gauges(1) 1/4" NPT Drain Cock(4) 3/8" NPT Slowdown, Metering Mufflers - Brass Body WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Shipping: Shipping Via UPS in all 50 States in USA. Other Expedited Shipping methods are available for this item. International Shipping Via USPS First Class International Mail,USPS Priority Mail International and USPS Express Mail International only. Please note we may ship this item via UPS to certain countries based on destination country location as well total number of items purchased together.

Price: 2545.85 USD

Location: Mansfield, Texas

End Time: 2023-11-06T19:58:00.000Z

Shipping Cost: N/A USD

Product Images

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Brand: Newmatics

Warranty: 1 Year

Included Hardware: Bag Brackets, Air Bag, Mounting Hardware

Bundle Description: 1992-1997 Lincoln Town Car Kit

Custom Bundle: Yes

Fitment Type: Performance/Custom

Manufacturer Part Number: LIN92-97-TOWN-ANA12VFBSS-KIT

Country/Region of Manufacture: United States

Adjustable: Yes

Modified Item: No

Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower

California Prop 65 Warning: WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Performance Part: Yes