19.7ft 6M 8mm 0.31 Inch Butyl Rubber Sealant Sound Deadening Rope Caulk Tape

Description: Feature:Good quality synthetic butyl rubber, good flexibility, and resistance to compression deformation.Available for sealing or resealing car headlights, windshield, headlamp, air conditioners.Easy to cut to fit your need.Simply release the sealant from paper and press it sufficiently around the pinch weld.Can effectively keep out the wind, prevent water leakage and lower the noise outside the car.Specification:Material: Synthetic Butyl RubberColor: BalckLength: 600cm / 236.22"(L)Width: 8mm / 0.31"(W)Thickness: 8mm / 0.31"(T)Application:After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean, free from dust, oil, and grease. Release the sealant from the release paper and press it sufficiently around the pinch weld for complete contact.When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the other coupling part. The purpose of the sealer is to provide for a watertight seal. In cold weather conditions, it needs to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.Note:The good using temperature is 20 degrees Fahrenheit to 120 degrees Fahrenheit. It gets stickier as it gets warmer. So please keep it away from sunshine in the coming summer, or if you are working in the colder temps a hairdryer can be helpful.Package Included:1 x Car Headlight Butyl Rubber Sealant Tape 19.7ft 6M 8mm 0.31 Inch Butyl Rubber Sealant Sound Deadening Rope Caulk Tape Feature:Good quality synthetic butyl rubber, good flexibility, and resistance to compression deformation.Available for sealing or resealing car headlights, windshield, headlamp, air conditioners.Easy to cut to fit your need.Simply release the sealant from paper and press it sufficiently around the pinch weld.Can effectively keep out the wind, prevent water leakage and lower the noise outside the car.Specification:Material: Synthetic Butyl RubberColor: BalckLength: 600cm / 236.22"(L)Width: 8mm / 0.31"(W)Thickness: 8mm / 0.31"(T)Application:After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean, free from dust, oil, and grease. Release the sealant from the release paper and press it sufficiently around the pinch weld for complete contact.When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the other coupling part. The purpose of the sealer is to provide for a watertight seal. In cold weather conditions, it needs to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.Note:The good using temperature is 20 degrees Fahrenheit to 120 degrees Fahrenheit. It gets stickier as it gets warmer. So please keep it away from sunshine in the coming summer, or if you are working in the colder temps a hairdryer can be helpful.Package Included:1 x Car Headlight Butyl Rubber Sealant Tape ITEM SPECIFICS BrandUauto1Manufacturer Part NumberDoes Not ApplyTypeCar Headlight Butyl Rubber Sealant TapeColorBlackBacking MaterialSynthetic Butyl RubberWidth8mm / 0.31"(W)FeaturesHigh TackThickness8mm / 0.31"(T)Length600cm / 236.22"(L)Maximum Operating Temperature20 degrees Fahrenheit to 120 degrees FahrenheitModified ItemNoProduct NameCar Headlight Butyl Rubber Sealant TapeNet Weight699gShell Color BlackPlacement on VehicleFront,Rear,Left,RightMaterialSynthetic Butyl Rubberupc726215673265 YOU SHOULD KNOW If you have any questions, please feel free to contact our customer service. Our response will be faster than eBay! ABOUT USSHIPPING POLICYPAYMENTRETURNCONTACT US uauto1 is based in United States, selling aftermarket automotive parts and accessories. We believe in FACTORY DIRECT purchases. Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever. We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy. We are positioned to bring you the latest consumer automotive aftermarket parts and accessories globally and round the clock. We are proud to have served over 500,000 eBay buyers worldwide. International Buyers - Please Note: Taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges. Note that delivery times may vary, particularly during peak periods or in climate weather conditions. All items will be dispatched from our warehouse in Kentucky directly. We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery. All our items will be shipped to buyer's address, please confirm your address on eBay before you bid. Payment Methods: We accept eBay payment. We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended. We offer a 30 day return policy. This is under the following conditions: The item must be unused and in a resalable condition otherwise are not eligible for a refund. All items returned by post are returned at your expense, we cannot be held responsible for this. Please use a traceable service. Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. If no response for you within 48 hours, please check the spam / junk folder in your mail box. DescriptionPolicy 19.7ft 6M 8mm 0.31 Inch Butyl Rubber Sealant Sound Deadening Rope Caulk Tape Feature:Good quality synthetic butyl rubber, good flexibility, and resistance to compression deformation.Available for sealing or resealing car headlights, windshield, headlamp, air conditioners.Easy to cut to fit your need.Simply release the sealant from paper and press it sufficiently around the pinch weld.Can effectively keep out the wind, prevent water leakage and lower the noise outside the car.Specification:Material: Synthetic Butyl RubberColor: BalckLength: 600cm / 236.22"(L)Width: 8mm / 0.31"(W)Thickness: 8mm / 0.31"(T)Application:After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean, free from dust, oil, and grease. Release the sealant from the release paper and press it sufficiently around the pinch weld for complete contact.When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the other coupling part. The purpose of the sealer is to provide for a watertight seal. In cold weather conditions, it needs to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.Note:The good using temperature is 20 degrees Fahrenheit to 120 degrees Fahrenheit. It gets stickier as it gets warmer. So please keep it away from sunshine in the coming summer, or if you are working in the colder temps a hairdryer can be helpful.Package Included:1 x Car Headlight Butyl Rubber Sealant Tape ITEM SPECIFICS BrandUauto1Manufacturer Part NumberDoes Not ApplyTypeCar Headlight Butyl Rubber Sealant TapeColorBlackBacking MaterialSynthetic Butyl RubberWidth8mm / 0.31"(W)FeaturesHigh TackThickness8mm / 0.31"(T)Length600cm / 236.22"(L)Maximum Operating Temperature20 degrees Fahrenheit to 120 degrees FahrenheitModified ItemNoProduct NameCar Headlight Butyl Rubber Sealant TapeNet Weight699gShell Color BlackPlacement on VehicleFront,Rear,Left,RightMaterialSynthetic Butyl Rubberupc726215673265 YOU SHOULD KNOW If you have any questions, please feel free to contact our customer service. Our response will be faster than eBay! ABOUT US uauto1 is based in United States, selling aftermarket automotive parts and accessories. We believe in FACTORY DIRECT purchases. Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever. We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy. We are positioned to bring you the latest consumer automotive aftermarket parts and accessories globally and round the clock. We are proud to have served over 500,000 eBay buyers worldwide. SHIPPING POLICY International Buyers - Please Note: Taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges. Note that delivery times may vary, particularly during peak periods or in climate weather conditions. All items will be dispatched from our warehouse in Kentucky directly. We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery. All our items will be shipped to buyer's address, please confirm your address on eBay before you bid. PAYMENT Payment Methods: We accept eBay payment. We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended. RETURN We offer a 30 day return policy. This is under the following conditions: The item must be unused and in a resalable condition otherwise are not eligible for a refund. All items returned by post are returned at your expense, we cannot be held responsible for this. Please use a traceable service. CONTACT US Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. If no response for you within 48 hours, please check the spam / junk folder in your mail box.

Price: 20.99 USD

Location: Florence, Kentucky

End Time: 2023-11-09T02:32:55.000Z

Shipping Cost: 0 USD