1963-1982 Corvette Rear Sway Bar Kit, 3/4 Inch, Addition

Description: Achieve flatter cornering and greater stability at higher speeds, 3/4" diameter solid steel constructed bar, Includes durable polyurethane bushings for increased responsiveness, High quality Black powder coated finish, Designed for Corvettes originally equipped without a sway bar, however extra hardware is included that may be used for those originally equipped with a sway bar 1963-1982 Corvette Rear Sway Bar Kit, 3/4 Inch, Addition Sku # 113913 Mfr. Part # 113913 Condition New Brand Speedway Motors Sold Each Details Info These rear sway bars are designed as a performance replacement upgrade for your classic Chevrolet Corvette. They feature a 3/4" diameter solid steel bar and come with all additional hardware needed for a successful installation. This kit is designed for use with cars that were NOT originally equipped with a sway bar from the factory. However if used with cars originally equipped with sway bars, additional hardware included in this kit may or may not be needed. Achieve flatter corneringComplements front sway bar to reduce understeer and gain more neutral handingAdds to cornering stability at speedSolid steel 3/4" diameter barIncludes polyurethane bushings for increased responsivenessBlack powder coated finishCorrosion resistant zinc plated hardware included Fits: (vehicles originally equipped without a sway bar) 1963-1982 Chevrolet Corvette Specs Material Type Steel Sold in Quantity Each Finish Powder Coated Hardware Included Yes Tube O.D. .75 MFG. Part # 113913 Reviews Not perfect but with a little persuasion it fit. Rated by Don S on June 09, 2021 Summary: This was installed to make the car corner a bit better. Yes, I recommend this product. A nice upgrade. Rated by Bob on February 26, 2020 Summary: Easy to install. If working on a C3 is ever easy at home. Pros: Improved handling. Yes, I recommend this product. Awesome Sway bar set-up Rated by Lucky on October 26, 2019 Summary: awesome sway bar set up with grease fittings...only problem was I had to enlarge the trailling arm holes,and use smaller bolts where it mounts to the frame of the vehicle.Still in the finishing phase of the installation. But am very happy with it cant wait to see how much improvement it adds to the corvette. Thanks so much. Cons: not a direct fit Pros: it is an awesome set-up large bar w/grease certs Yes, I recommend this product. I would but this from you again in a minute!! Rated by Bill on March 28, 2017 Summary: I installed this on my own car as a shop owner I was very impressed! Yes, I recommend this product. The way it should have been done by GM Rated by Ken on June 26, 2016 Summary: I am currently restoring two C3 corvettes, a 69 convertible and a 75 T-top. I have bought parts from many different companies and scrounged others. I always seem to come back to Speedway because of cost, part selection, and consistent quality. I bought this 3/4 inch rear sway bar for my 75. I intend on driving and enjoying this car much more than you ever could with a concourse show winner. I want it to perform and drive like a new car so I carefully selected suspension components for it. As I installed the sway bar I was really impressed with the design of the end links and the way it mounts to the trailing arms. It makes so much more since when compared to GMs original design. It has sturdy and "clean" mounts, and to top it off, it comes with nice rigid polyurethane "gromets" that will further increase performance. The total install time was about an hour and that included rounding up the tools, and removing the tires. The included instructions where easy to read simple and clear. I am totally impressed with everything about this kit. Like I said before this is just one piece of my suspension upgrade. I know it added to the performance of my car and totally worth the time and comparatively low cost. Thanks again to Speedway Motors for coming through and exceeding my expectations again. Cons: None Pros: Quality Kit Yes, I recommend this product. Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 174.99 USD

Location: Lincoln, Nebraska

End Time: 2024-08-28T12:05:08.000Z

Shipping Cost: 0 USD