1.5 inch (38mm) Lift Kit for 2001-2006 Acura MDX by HRG Offroad

Description: Our powder coated steel strut spacers are designed to work with your factory Honda suspension to achieve approximately 1.5 inches of lift in the front and 2.0 inches in the rear, for a level lift. Results vary with aftermarket springs and struts.These spacers do not require the disassembly of the strut.*see our other listings for a kit that includes the camber adjusters.Fits2001-2006 Acura MDXKit Includes4 spacers 1.5 inch front1.0 inch rear. (WHY ARE THE SPACERS NOT 1.5 AND 1.5? Please take a minute to see our FAQ section.)Front Camber AdjustersGrade 10.9 hardware Detailed illustrated installation instructions. Link to installation videoFAQ.Q: "Why are the front spacers taller than the rear spacers?"A: The suspension geometry is different in front than in rear. In order to get an equal amount of lift front and back, different size spacers have to be used.Q: "Will I need an alignment after installing this kit?"A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1".Q: "Will lifting my car affect the axles?"A: Sometimes. It depends on the amount of lift and the type of axles you have in your vehicle. Parts store rebuilt axles are more prone to having issues. In general, installing lift spacers taller than 2" will require a subframe drop to maintain proper axle angle.Q: "Do I need to replace my suspension bushings when installing a lift kit?"A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely without binding up.Q: "Will lifting my car negatively affect the handling?"A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important. Accessories HRG Offroad Rock lights 6 pc kit RGB Rock Lights Single Colors and RGB color to choose from. Original Osram/Cree A Grade Chips Waterproof: IP68 & IP69KDuPont painting, Aluminum housing 20 INCH SINGLE ROW LED LIGHT BAR 8,560 LUMENS Need a LOT of light for off-road driving but don't want a huge light bar hanging off your car? This slim 20 inch single-row light bar utilizes a combination beam pattern and pumps out an incredible 8,560 lumens! Focused beam can provide light for almost 3600 feet!Lifetime WarrantyOur kits are powder coated for a durable, attractive finish and use grade 10.9 hardwareProfessional Installation recommendedFOR OFF-ROAD USE ONLY!MADE IN U.S.A.

Price: 329 USD

Location: Mooresville, North Carolina

End Time: 2024-08-07T20:15:34.000Z

Shipping Cost: 0 USD