12V 24V Power Probe Automotive Short & Open Finder Circuit Tester Voltage Tool

Description: 12V 24V Power Probe Automotive Short & Open Finder Circuit Tester Voltage Tool KZYEE KM10 Power Probe ---Kzyee KM10 super electrical probe diagnostic tool supports 12V and 24V electrical systems.---Built-in voltage & polarity, continuity, Trailer Lights and Connections as well as signal circuit testing. it can quickly and accurately find trouble spot.---Activating components in the vehicle or W/Ground, reading voltage display red/green polarity LED, tracing & locating short circuits, bad ground contacts. KM10 Car Circuit Tester Key Features 1.Highly reliable and easy to use with 6 Meter long strong cable,convenient to test from the front to the rear of the car.2.Built-in flashlight enables you to work in the dark3.LED screen allows you to read voltage, current and resistance at the fingertip4.Test mode contain AV Voltage, DC Voltage, Current Resistance, LED, including most car circuit test system5.Including Cigarette Lighter adaptor, battery test clips, easy to get battery supply from the car6.Circuit Breaker Protection: Ability to Power Up Components. Automatically shut-off if current exceeds 5 Amperes, it design to protect an electrical circuit from damage caused by over-current, typically resulting from an overload or short circuit.Warm Note: This probe is very sharp on the pointed end, easily to get hurt. Better to be more careful when performing. KM10 Power Probe Functions 1. Perform these functions: power injection, measuring, ground testing, polarity checking, continuity testing and component activation.2. Read the AVO meter, voltage, current, and resistance easily.3. Press the power switch lightly and get the instant heat ground lead to energize the electrical components, such as the cooling fan, relay etc.4. Activate the components by using the hot wire and ground lead simultaneously.5. Determine the positive, negative and open circuit quickly.6. Test the bad ground contacts quickly, follow and locate short circuits without wasting the fuse.7. Test the continuity of the power switch, relay and diode quickly.8. Protect the tool from overload through the inner circuit breaker.9. Allow you to work in the dark area by using the built-in head light.10. Operate the tool without looking at the menu once users are familiar with the tone. Test along the vehicle by the long cable.Power Probe SpecificationsDisplay: TFT color display (160 x 128 dpi)Operating Temperature: 0 to 60°C (32 to 140°F)External Power: 12.0 or 24.0 V power provided via vehicle battery Package List1* KM10 PowerScan1 *Rugged Blow Molded Case1 *20ft. Extension Cable1 *Probe Tip1 *Battery Hookup Clips1 *Cigarette Lighter Adapter1 *User Manual

Price: 58.99 USD

Location: TX

End Time: 2024-08-10T06:42:34.000Z

Shipping Cost: 0 USD